Baby Trend CS0190B0211, E30FL0211U manual Setting Proper Recline of the Safety Seat / Base

Page 24

7.0INSTALLATION

7.4 Setting Proper Recline of the Safety Seat / Base

7.0INSTALLATION

1. Safety Seat with Base: Make sure the

vehicle is parked on level ground. Lock

the Safety Seat onto the Base and

check that the Safety Seat is level side

For your child’s safety, the Safety Seat must be properly reclined when installed in the vehicle. The Safety Seat includes a Seat Angle Indicator on the lower portion of the shell on the child’s left side, to assist in achieving the proper angle of recline for the Safety Seat. (Fig. 46-2)

Fig. 46-1a

Press to release

Fig. 46-1b

ECT

 

 

 

 

CORR

G

 

 

 

 

ON

 

 

 

 

ds

WR

 

 

 

 

 

 

 

 

20

poun

 

 

 

 

)and

 

 

 

(9kg

r

 

 

 

 

unde

 

 

20to

30

 

 

 

 

 

ds

 

 

 

poun

 

 

(9to

13.6kg)

 

 

 

 

 

 

 

 

to side on the vehicle seat. (Fig. 47-1)

Check the Seat Angle Indicator that

matches the weight of your child.

• If the Seat Angle Indicator shows NO

red, the seat is installed at the proper

level of recline.

• If the Seat Angle Indicator shows

ANY red, the Safety Seat is either

too upright or too reclined. If the

seat is too upright, extend the foot

Fig. 47-1

Use weight range as appropriate

See warning label on safety seat

Fig. 46-2

WARNING

Failure to properly recline the Safety Seat on the vehicle seat increases the risk of death or serious injury. If the Safety Seat is positioned too upright, the child’s head may drop forward and result in breathing problems. If the Safety Seat is too reclined, excessive force may be exerted on the child’s shoulders and neck in a crash. The following instructions must be carefully followed to ensure proper recline angle for the Safety Seat.

46

one position at a time just until no

red shows. To extend the foot of the

base, pull downward on the hand hold

as shown in Fig. 47-2 while holding

onto the base. To retract the foot,

press inward on the lock button as

shown in Fig. 47-3 and push upward

on the foot. Be careful not to pinch

your finger as the foot retracts.

Check the level indicator to see if the

seat is now level.

• If seat angle adjuster feature does

not adjust enough to provide the

Fig. 47-2

Foot Adjustment

Lock Button

Fig. 47-3

47

Image 24
Contents FLEX-LOC Table of Contents HOW to Register Your Safety Seat Your child’s safety depends onRegister Safety Safety InformationSafety Standards About your childAbout Active Air Bags About an unoccupied Safety Seat About this Safety SeatAbout use as a carrier Safety Selecting the Best Location for the Safety Seat LocationOverall Considerations in Selecting a Location Check that the Vehicle Seat Belt is Safe to Use Location Seat belt Fig Lap/shoulder combination seat belt withFeatures Safety Seat Features and Their Proper USERear view of Adjustable Back Model 5-Point HarnessRear View of Fixed Back Model BaseLock Button Use of the Safety Seat with the Base Other Features HarnessLatch Connectors Seat Angle Indicator Seat Angle AdjusterCrotch Strap Operation of the Carry HandleAdjustment of the Shoulder Straps Attaching the CanopySlip the canopy stays through the sleeves on the canopy Or crashTurn the seat over. Locate the Belt Adjuster Adjuster Plate. FigRemove both Harness Straps from the Belt Safety Seat. Fig From the Safety Seat. FigWill see the crotch strap anchor clip Car seat shell. Pull outwardUsing Infant Restraint Securing your Child in the Safety Seat / CarrierInfant Restraint Installation Securing the Safety Seat or Base in the VehicleFor the 5-Point Harness Preparation Through the Safety Seat without the Base To tighten a lap belt onlySeat. Fig Installation of the Base using Latch On the Latch connector to loosen That the Latch connector can not beConnector to release the connector To remove the base from the vehicleSetting Proper Recline of the Safety Seat / Base Final Safety Checks Safety Seat or Base in the VehicleFinal Checks Using the Safety Seat in an Airplane For care and maintenance see fabric tagADD’L Information Additional InformationReplacement Parts

E30FL0211U, CS0190B0211 specifications

The Baby Trend CS0190B0211 and E30FL0211U are innovative travel systems designed to provide parents with convenience, safety, and comfort while transporting their little ones. These models stand out due to their thoughtful engineering, modern features, and user-friendly design.

One of the main features of the Baby Trend CS0190B0211 is its compatibility with infant car seats, allowing for a seamless transition from car to stroller. This travel system includes an easy-to-install infant car seat that has undergone stringent safety testing. The car seat boasts a adjustable five-point safety harness that ensures your baby is securely fastened during travel, providing peace of mind for parents on the go.

The stroller included in this system is designed for versatility and comfort. With a multi-position reclining seat, it can accommodate newborns and older infants alike, making it a practical option for those in varying stages of development. The stroller features a large canopy that offers UV protection and creates a sheltered environment, ideal for sunny or rainy days.

The E30FL0211U model introduces advanced technologies designed to enhance usability. It incorporates a one-hand fold mechanism, allowing parents to collapse the stroller effortlessly, which is particularly beneficial when handling bags or other items with one arm. The lightweight frame ensures easy maneuverability, while the front swivel wheels improve navigation in tight spaces.

An additional characteristic of both models is the generous storage basket located beneath the stroller. This spacious area allows parents to carry essential items such as diapers, wipes, and personal belongings, keeping everything within easy reach. The handle is designed for a comfortable grip, making long walks easier on the hands.

Safety is a priority for Baby Trend, and both travel systems feature effective braking systems that ensure the stroller remains in place during use. The materials used in production are also selected with the well-being of both the child and environment in mind, ensuring durability and comfort.

In conclusion, the Baby Trend CS0190B0211 and E30FL0211U travel systems provide exceptional features and technologies designed to make parenting more manageable. With safety as a cornerstone, these models combine convenience with thoughtful design, making them a preferred choice for modern families seeking functionality in their travel gear.