HOW TO USE THE SOUND SYSTEM
To play music or audio books through the console sound system while you exercise, plug the included audio cable into the jack on the console and into a jack on your MP3 player or CD player; make sure that the audio cable is fully plugged in.
Next, press the play button on your MP3 player or CD player. Adjust the volume level using the Volume increase and decrease buttons on the console or the volume control on your MP3 player or CD player.
HOW TO CHANGE CONSOLE SETTINGS
The console features an information mode that allows you to view usage information, select a unit of mea- surement, and adjust the contrast level of the display.
When an iFit Live module is connected to the console, you can also use the information mode to choose an audio setting for the voice of the personal trainer, set a default menu, check the status of the iFit Live module, and check for downloads.
1.Select the information mode.
To select the information mode, press and hold down the Display button for a few seconds until the information mode appears in the display.
2.View usage information.
Meijer.com
5.Determine if an iFit Live module is connected to the console.
If an iFit Live module is connected to the console, the display will show the words WIFI MODULE or
USB MODULE.
If no module is connected, the display will show the words NO IFIT MODULE. If no module is con- nected, go to step 10.
6.Select an audio setting for the voice of the personal trainer if desired.
Press the decrease button to view the audio setting for the voice of the personal trainer. The currently selected audio setting for the voice of the personal trainer will appear in the display.
To change the audio setting, press the Enter button repeatedly to turn the voice of the personal trainer ON or OFF.
7.Set the default menu if desired.
Press the decrease button to view the default menu setting. The default menu is the menu that will appear when you turn on the console. Press the Enter button repeatedly to select the manual mode menu or the iFit Live menu as the default menu.
8Check the status of the iFit Live module if desired.
The display will show the total number of hours that the elliptical has been used. The display will also show the total distance (in miles or kilometers) that has been pedaled on the elliptical.
3.Select a unit of measurement if desired.
The word ENGLISH for English miles or the word METRIC for metric kilometers will appear in the display to indicate the currently selected unit of measurement.
To change the unit of measurement, press the Enter button repeatedly to select the desired unit of measurement.
4.Adjust the contrast level of the display if desired.
Press the decrease button to view the contrast level. The currently selected contrast level will appear in the display. Press the Resistance increase and decrease buttons to adjust the con- trast level.
Press the decrease button to view the iFit Live status display. The words CHECK WIFI STATUS or CHECK USB STATUS will appear in the display.
Then, press the Enter button. After a few seconds, the status of the iFit Live module will appear in the display. To exit this display, press and hold down the Display button for a few seconds.
9.Check for downloads if desired.
Press the decrease button to view the downloads display. The words SEND/RECEIVE DATA will appear in the display.
Then, press the Enter button. The console will then check for iFit Live workouts and firmware downloads.
10.Exit the information mode.
Press the Display button to exit the information mode.
22
