Baby Trend CS0190B0211 manual Turn the seat over. Locate the Belt Adjuster, Adjuster Plate. Fig

Page 16

5.0FEATURES

5.0FEATURES

straps to be even with or just below your child’s shoulders. (Fig. 30-1) The harness straps are adjusted as follows:

1.Remove the Safety Seat from the Base and rotate the Carry Handle to the back position. Place your child in the Safety Seat such that your child’s bottom is all the way to the rear and bottom of the seat.

2.Determine which pair of slots will position the harness straps even with or just below your child’s shoulders. DO NOT use harness slots that will position the harness straps above your child’s shoulders as the harness straps in this position will not restrain a small child in a sharp turn, sudden stop or crash.

3.If the Harness Straps require adjustment, remove your child from the Safety Seat. Rotate the handle to the upright carry position.

4.Loosen the harness straps by depressing the Harness Adjuster Button located below the flap just ahead of the Harness Buckle and pulling on the harness straps.

5.Turn the seat over. Locate the Belt Adjuster

Plate near the bottom of the seat. (Fig. 30-2)

Remove both Harness Straps from the Belt

30

Proper height is even or

just below shoulder

Fig. 30-1

A

B

A

B

Fig. 30-2

Adjuster Plate. From the front of the seat, pull the Harness Straps through the shoulder area slots and seat pad.

6.Using the included Belt Threading Tool, insert the Harness Straps through the Slots selected in step 2 above, in the seat pad and the seat shell, respectively. (Fig. 31-1)

7.From the rear of the Safety Seat, pull the

Harness Straps through the Slots until you have enough strap to reach the Belt Adjuster Plate.

8.Reassemble the Harness Straps to the Belt Adjuster Plate. Do the left Harness Strap first, followed by the right Harness Strap.

Check that Harness Straps are completely within the Belt Adjuster Plate loop (Fig. 31-2).

You have two adjustment positions on the harness. Use Position A for a smaller child, and Position B for a larger child. If using Position A, loop B must be on top of the Belt

Adjuster Plate. (Fig. 31-3)

9.Inspect the Harness Straps from the front and rear to ensure that they are not twisted. Twisted straps can prevent proper tightening of the Harness and thus may not adequately restrain your child in a sharp turn, sudden stop or crash.

Belt Threading Tool

Fig. 31-1

AA B

Fig. 31-2

A

A

B

B

Fig. 31-3

31

Page 15 Page 17
Image 16
Page 15 Page 17
Contents FLEX-LOC Table of Contents Your child’s safety depends on HOW to Register Your Safety SeatRegister Safety Safety InformationSafety Standards About your childAbout this Safety Seat About Active Air Bags About an unoccupied Safety SeatAbout use as a carrier Safety Location Selecting the Best Location for the Safety SeatOverall Considerations in Selecting a Location Check that the Vehicle Seat Belt is Safe to Use Location Seat belt Fig Lap/shoulder combination seat belt withFeatures Safety Seat Features and Their Proper USERear view of Adjustable Back Model 5-Point HarnessBase Rear View of Fixed Back ModelLock Button Other Features Harness Use of the Safety Seat with the BaseLatch Connectors Seat Angle Indicator Seat Angle AdjusterCrotch Strap Operation of the Carry HandleAdjustment of the Shoulder Straps Attaching the CanopySlip the canopy stays through the sleeves on the canopy Or crashAdjuster Plate. Fig Turn the seat over. Locate the Belt AdjusterRemove both Harness Straps from the Belt Safety Seat. Fig From the Safety Seat. FigWill see the crotch strap anchor clip Car seat shell. Pull outwardSecuring your Child in the Safety Seat / Carrier Using Infant RestraintInfant Restraint Securing the Safety Seat or Base in the Vehicle InstallationFor the 5-Point Harness Preparation To tighten a lap belt only Through the Safety Seat without the BaseSeat. Fig Installation of the Base using Latch On the Latch connector to loosen That the Latch connector can not beConnector to release the connector To remove the base from the vehicleSetting Proper Recline of the Safety Seat / Base Safety Seat or Base in the Vehicle Final Safety ChecksFinal Checks Using the Safety Seat in an Airplane For care and maintenance see fabric tagADD’L Information Additional InformationReplacement Parts

E30FL0211U, CS0190B0211 specifications

The Baby Trend CS0190B0211 and E30FL0211U are innovative travel systems designed to provide parents with convenience, safety, and comfort while transporting their little ones. These models stand out due to their thoughtful engineering, modern features, and user-friendly design.

One of the main features of the Baby Trend CS0190B0211 is its compatibility with infant car seats, allowing for a seamless transition from car to stroller. This travel system includes an easy-to-install infant car seat that has undergone stringent safety testing. The car seat boasts a adjustable five-point safety harness that ensures your baby is securely fastened during travel, providing peace of mind for parents on the go.

The stroller included in this system is designed for versatility and comfort. With a multi-position reclining seat, it can accommodate newborns and older infants alike, making it a practical option for those in varying stages of development. The stroller features a large canopy that offers UV protection and creates a sheltered environment, ideal for sunny or rainy days.

The E30FL0211U model introduces advanced technologies designed to enhance usability. It incorporates a one-hand fold mechanism, allowing parents to collapse the stroller effortlessly, which is particularly beneficial when handling bags or other items with one arm. The lightweight frame ensures easy maneuverability, while the front swivel wheels improve navigation in tight spaces.

An additional characteristic of both models is the generous storage basket located beneath the stroller. This spacious area allows parents to carry essential items such as diapers, wipes, and personal belongings, keeping everything within easy reach. The handle is designed for a comfortable grip, making long walks easier on the hands.

Safety is a priority for Baby Trend, and both travel systems feature effective braking systems that ensure the stroller remains in place during use. The materials used in production are also selected with the well-being of both the child and environment in mind, ensuring durability and comfort.

In conclusion, the Baby Trend CS0190B0211 and E30FL0211U travel systems provide exceptional features and technologies designed to make parenting more manageable. With safety as a cornerstone, these models combine convenience with thoughtful design, making them a preferred choice for modern families seeking functionality in their travel gear.
Top Page Image Contents