42
Picture and sound settings are preset from the factory to neutral values
Adjust picture and sound settings
Change brightness, colour or contrast
which suit most viewing and listening situations. However, if you wish, you can adjust these settings to your liking.
Adjust picture brightness, colour or contrast. Sound settings include volume, bass and treble.
Store your picture and sound settings temporarily – until your television is switched off – or store them permanently.
For information about how to change the picture format, refer page 9.
Adjust the picture settings via the PICTURE menu. Temporary settings are cancelled when you switch off the television.
>Press TV to switch on the television.
>Press MENU to bring up the TV SETUP menu and press 
to highlight PICTURE.
>Press GO to bring up the PICTURE menu.
>Press 
or 
to move through menu items.
>Press 
or 
to adjust the values.
>Press EXIT to store your settings until you switch off the television, or …
>… press GO to store your settings permanently.
To temporarily remove the picture from the screen, press LIST repeatedly to display P.MUTE on Beo4, then press GO. To restore the picture again, press any source button, such as TV.
PICTURE
BRIGHTNESS ...............
CONTRAST...............
COLOUR...............
TINT...............
SIZE...............
select GO
When signals are sent in format 1080p or 1080i, the menu item SIZE is available in the picture menu.
What’s on the PICTURE menu …
BRIGHTNESS … Adjusts the picture brightness. CONTRAST … Adjusts the contrast level in the
picture.
COLOUR … Adjusts the colour intensity in the picture.
(SIZE) … If you experience any irregularities along the edges of the picture, select SIZE and adjust.
If a source, such as a PC, is connected via the VGA socket, the following options appear:
HOR. SIZE … Adjusts the width of the picture. VERT. SIZE … Adjusts the height of the picture. HOR. POSITION … Adjusts the position of the
picture horisontally.
VERT. POSITION … Adjusts the position of the picture vertically.
For video sources using the NTSC signal, a further option – Tint (colour shade or nuance) – will be available for adjustment.
