29

When you have connected additional video equipment to your television, you must also ‘tell’ the system what is connected.

What’s on the AV1 – AV4 menu …

SOURCE … Select the source you have connected. The option you select indicates which remote control button switches on the source. For example, a source registered as V.MEM is switched on when you press the V MEM button. V.MEM … If you have connected a Bang & Olufsen video recorder or any other video recorder.

DVD … If you have connected a DVD player. DTV … If you have connected a set-top box registered as DTV.

V.AUX … If you have connected a set-top box or other equipment registered as V.AUX. DECODER … If you have connected a decoder. PC … For a connected PC.

NONE … If no equipment is connected.

IR SOCKET … If the equipment connected to this socket is controlled via IR, select which socket the IR controller is connected to; PUC1, PUC2, PUC3 or PUC4.

HDMI … Indicates whether or not the equipment is connected to the television via one of the HDMI sockets. Select the appropriate socket: A or B.

S/P-DIF … Indicates whether or not the equipment is connected to the television via one of the SPDIF sockets. Select the appropriate socket: 1 or 2.

(YPbPr) … Indicates whether or not the equipment is connected to the television via the YPbPr sockets. Options are YES and NO. Only available in the AV2 and AV3 menus, and can only be registered in one of these menus at any time.

(VGA) … Indicates whether or not the equipment is connected via the VGA socket. Options are YES and NO. Only available in the AV3 menu.

While it is possible to register your equipment under any of the available source names, the names you select affect how you can use your sources.

Automatic standby …

When you register a set-top box in the CONNECTIONS menu, you can also select a ‘standby setting’ time for your set-top box. This means that you can select if the connected set-top box should switch to standby automatically.

The options are:

OFF AT SOURCE CHANGE … The set-top box is switched on when selected, and off when another source is selected.

OFF AT TV STANDBY … The set-top box is switched on when selected, and off when the television is switched off.

ALWAYS ON … The set-top box is always on and never switched off.

MANUAL CONTROL … The set-top box is not switched on and off automatically. You switch it on and off manually by means of the Beo4 remote control.

DTV SETUP

SELECTOR

NOKIA 9800S/025

NOKIA 9602S

NOKIA 9820t

NOKIA 9200

PACE DTR730-IM

select GO

If you have connected a set-top box, you will be prompted to select your set-top box from an onscreen list when you select an IR socket in the CONNECTIONS menu.

If a source is connected to the HDMI socket, some video functions are affected:

You cannot distribute sound or picture from a HD source to a product in a link room, unless your HD equipment also provides a Standard Definition (SD) signal

You cannot record an HD source, unless your HD equipment also provides a Standard Definition (SD) signal.

NOTE! Contents of the CONNECTIONS menu depend on whether the television is equipped with the optional System Module or not.

Page 29
Image 29
Bang & Olufsen 8 manual What’s on the AV1 AV4 menu …, Automatic standby …