Britax Boulevard manual Installation Forward Facing, 5Rotate seat into forward-facing position

Installation: Forward Facing

5�Rotate seat into forward-facing position.

6�Verify LATCH strap is not twisted, then attach remaining LATCH connector to adjacent LATCH anchor (fig. D).

• A positive click confirms attachment.

7�Kneel on child restraint to push it into vehicle seat while pulling each LATCH strap tight (fig. E).

8�Verify all connections and restraint are secure. The restraint is secure when it cannot be moved front- to-back or side-to-side more than 1” (2.5 cm.) at belt path. If restraint is not secure, repeat procedure or use an alternate seating location.

9�Remove slack from Versa-Tether and store excess webbing in tether pouch.

Removal

Disconnect Versa-Tether from tether anchor. While pushing restraint firmly into vehicle seat, press red release buttons on LATCH connectors to release. When not in use, always store LATCH connectors and Versa-Tether.

D

E

WARNING! Use vehicle belt (not LATCH connectors) for installations with children weighing more than 48 pounds (21 kg.). Refer to your vehicle’s owner’s manual or contact vehicle

manufacturer for maximum weight rating for their LATCH anchors. Unless specified otherwise by vehicle manufacturer, assume a 48-pound child is vehicle LATCH anchor limit.

19