Care and Maintenance
Harness Buckle Removal |
| |
1 | Fully recline the child seat. |
|
2 | Locate the metal buckle strap retainer on the |
|
| bottom of the child seat. |
|
3 | Pull the retainer away from the child seat to |
|
| loosen. | A |
4 | Turn the retainer so the short side will fit through | |
| the slot in the child seat shell (Fig. A). |
|
5Push the retainer through the slots in the shell and cover, to the top of the child seat.
Re-threading the Harness Buckle
1Locate the slot in cover and shell for the harness buckle.
2Turn the buckle retainer so the short side will fit through the slot in the cover and the child seat shell (Fig. A).
3Push the retainer through the slots in the shell and cover, to the bottom of the child seat.
4Pull the harness buckle away from the child seat until tight and verify the strap is not twisted and the release button is facing outward.
Care and Maintenance
Cleaning the Harness Buckle
If a child eats and drinks while in the child seat, the harness buckle may need to be periodically checked and cleaned of any food, drink or other debris.
• REMOVE BUCKLE as described on page 36. | B |
|
• THOROUGHLY RINSE using warm water (Fig. B). |
|
|
• TEST THE HARNESS BUCKLE by fastening |
|
|
(Fig. C) and unfastening (Fig. D) until a positive |
|
|
click is heard after inserting each buckle |
|
|
tongue. If either click is not heard, repeat |
|
|
cleaning procedure. |
|
|
• TOWEL DRY | C |
|
• DO NOT lubricate, use solvents, abrasive | x 2 | |
cleaners, soap or other household detergents. |
|
|
D
36 | 37 |