Graco 8490, 8486 Securing the Car Seat in Your Vehicle, With a Vehicle Lap or Lap/shoulder Belt

Page 22

6.2Securing the Car Seat in Your Vehicle

FAILURE TO PROPERLY SECURE THE CAR SEAT IN THE VEHICLE INCREASES THE CHILD’S RISK OF SERIOUS INJURY OR DEATH IN THE EVENT OF A SHARP TURN, SUDDEN STOP OR CRASH.

Carefully follow these instructions and those in your vehicle owner’s manual to be sure your car seat is properly located, positioned, and held tightly at all times.

6.2.1With a Vehicle Lap or Lap/shoulder Belt:

Store LATCH. See Section 8.2, Storing LATCH, page 32.

1.Place the car seat firmly against the back of a forward-facing vehicle seat.

2. Thread the seat belt:

For Lap/Shoulder belt

For Lap-only belt

3.Buckle the vehicle belt. The vehicle belt should not be twisted or turned.

22

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Car Seat/Booster Seat Understand the instructions in this manualTable of Contents Your child’s safety depends on Properly securing your child in the car seatRecall Information Registration InformationRegister Your Car Seat If You Need HelpFeatures Cupholder certain modelsAdjuster Important Information Never Leave Your Child UnattendedPage Height and Weight Limits With Built-in Harness Without Built-in HarnessCar Seat Location Vehicle Seat RequirementsUnsafe Vehicle Belt Systems Vehicle Seat Belt RequirementsLap Belts with Emergency Combination Lap/Shoulder Belt with Retractor Lap Belts Manually Adjusted Safe Vehicle Belt Systems For Built-in Harness OnlyCombination Lap/Shoulder Belt with Sliding Latch Plate With or Without Built-in HarnessCombination Lap/Shoulder Belt with Locking Latch Plate Locking clip provided withTo Install Locking Clip Connect lap and shoulder belts as shownWith Latch Open harness clip Using Car Seat with Built-in HarnessPositioning the Harness Straps Place child in the seatIf straps are in the proper slots, go to on Reassemble straps onto adjuster bar exactly as shown Push adjuster bar down Rotate red lock downHarness Adjustment See also .3, Securing Your Child in the Car Seat,Securing the Car Seat in Your Vehicle With a Vehicle Lap or Lap/shoulder BeltTighten vehicle seat belt Safety Check for Secure InstallationVehicle belt must stay tight. Car seat must be very tight Hook Latch Never put two Latch connectors on oneThread Latch Belt must lay flat and not be twistedSafety Check for Secure Installation All Latch seating Positions have tetherSecuring Your Child in the Car Seat Check that straps are not twistedPage Using Car Seat Without Built-in Harness For more help Open chest clip Harness RemovalRemove harness straps Remove crotch strap. See on page 19 for more helpSecuring Child and Booster Seat in Vehicle Additional information Using the TetherTighten the tether strap securely Storing Latch Latch storageAirplane Use Cupholder on certain modelsCare and Maintenance Buckle and Harness Adjuster clean with a damp clothRemove elastic To Remove Seat CoverPreceding instructions How to Order Replacement PartsHarness strap with buckle tongues Model No LatchAsiento para automóvil/ asiento para niños Uso del asiento para automóvil sin el Uso del asiento para automóvil con el Arnés incorporadoInformación adicional La seguridad de su niño depende de Advertencias a padres y otros usuariosSujetar a su niño correctamente en el asiento de seguridad Información sobre el retiro de productos del mercado Información sobre el registroRegistre su asiento para automóvil Por favor, complete la información que se solicitaSi necesita ayuda CaracterísticasApoya vasos ciertos modelos Conector del la soga ArnésAdvertencias Información importanteSegún las estadísticas de accidentes, LOS Page Limitaciones de peso y altura CON el arnés incorporado SIN el arnés incorporadoUbicación del asiento para automóvil Requisitos del asiento Del vehículoSistemas Peligrosos de cinturones de vehículos Requisitos del cinturón de seguridad del vehículoCinturones de regazo con Está conectada a la placa de seguridad en la otra punta Sistemas Seguros de cinturones de vehículos Para el arnés incorporado solamenteCon O sin el arnés incorporado Del vehículoPara instalar la traba de seguridad Con Latch Pliegue del Asiento Del vehículoColocación de las correas Del arnés Uso del asiento para automóvil CON el arnés incorporadoColoque al niño en el asiento Page Gire la traba roja hacia abajo Ajuste del arnés Vea también la Sección 6.3, Asegurar aPase el cinturón de seguridad Asegurar el asiento para automóvil en su vehículoCon el cinturón del vehículo de regazo o regazo/hombro Para el cinturón De regazo solamenteVerificación de seguridad para una instalación segura Ajuste el cinturón de seguridad del vehículoAdelante Pase el Latch Coloque el asiento paraEl cinturón debe mantenerse en posición plana sin torcerse Verificación de seguridad para una instalación segura Asegurar a su niño en el asiento del automóvil No use el asiento para automóvil si el arnés no se trabaPage Uso del asiento para automóvil SIN el arnés incorporado Si el niño no puede mantener elSaque las correas del Eliminación del arnésObtener más ayuda Desabroche el gancho del pecho Asegurar al niño y el asiento para niños en el vehículo Uso de la soga Información adicionalEl arnés Almacenamiento del Latch Apoya vasos En ciertos modelos Uso en aeronavesPuntos importantes que recordar Cuidado y mantenimiento Para sacar la funda del asiento Eliminación del Arnés, páginas Para obtener AyudaPiezas de repuesto Cómo hacer pedidosModel No. N de modelo Ship to Enviar a

8490, 8486 specifications

The Graco 8490 and 8486 are highly regarded models in the world of airless paint sprayers, designed to meet the demands of both professionals and DIY enthusiasts. These sprayers stand out due to their exceptional performance, durability, and user-friendly features, making them ideal for a variety of painting projects.

One of the main features of the Graco 8490 is its powerful motor, which is capable of delivering a consistent flow of paint. This ensures a smooth and even application, allowing users to achieve a professional finish with ease. The 8486 model, while slightly less powerful, still provides a reliable performance for lighter projects. Both models boast a high outlet pressure, which enables users to spray thicker materials and achieve better coverage in fewer coats.

The Graco 8490 comes equipped with the SmartControl technology, which ensures a consistent spray fan regardless of the pressure setting. This feature greatly enhances control during the painting process, allowing users to adjust the spray pattern according to their needs. The 8486 model, on the other hand, offers a simplified control system that is easy to operate, making it an excellent choice for those new to airless sprayers.

Durability is another key characteristic of these Graco models. Constructed with high-quality materials, both the 8490 and 8486 are built to withstand the rigors of frequent use. The design incorporates a sturdy frame and features like a built-in carrying handle for added convenience. Additionally, the easy-to-clean design helps maintain the sprayer's functionality over time, reducing the need for extensive maintenance.

Both models also come with Graco's proven RAC (Reverse-A-Clean) tip system, which allows for easy cleaning and quick tip replacement. This feature minimizes downtime and enhances the overall efficiency of the painting process.

In summary, the Graco 8490 and 8486 are exceptional airless paint sprayers that deliver superior performance, durability, and user-friendly features. Their innovative technologies, such as SmartControl and the RAC tip system, make them ideal choices for anyone looking to achieve a flawless paint job, whether for professional or personal projects. With these sprayers, users can expect consistent results and a seamless painting experience.
Top Page Image Contents