Graco 8490, 8486 manual Securing Child and Booster Seat in Vehicle

Page 30

7.2Securing Child and Booster Seat in Vehicle

1.Place car seat firmly against the back of a forward-facing vehicle seat equipped with a lap/shoulder belt only.

2.If you want to use tether to hold seat in place, secure it now. See Section 8.1 Using the Tether, page 31.

3.Place child in car seat with child’s back flat against back of car seat.

4. Position lap/shoulder belt as shown ￿. Fasten buckle and pull up on the shoulder belt to tighten.

5. If belt lays across child’s neck, head or face, redirect belt across chest using the shoulder belt positioner. Thread vehicle shoulder belt through one of the three positioners exactly as shown ￿.

Adjust positioner as high as possible without shoulder belt touching child’s neck.

6.Check that shoulder belt is properly positioned over shoulder and snug against child.

￿

￿

30

Image 30
Contents Car Seat/Booster Seat Understand the instructions in this manualTable of Contents Your child’s safety depends on Properly securing your child in the car seatRecall Information Registration InformationRegister Your Car Seat If You Need HelpFeatures Cupholder certain modelsAdjuster Important Information Never Leave Your Child UnattendedPage Height and Weight Limits With Built-in Harness Without Built-in HarnessCar Seat Location Vehicle Seat RequirementsVehicle Seat Belt Requirements Unsafe Vehicle Belt SystemsLap Belts with Emergency Combination Lap/Shoulder Belt with Retractor Lap Belts Manually Adjusted Safe Vehicle Belt Systems For Built-in Harness OnlyCombination Lap/Shoulder Belt with Sliding Latch Plate With or Without Built-in HarnessCombination Lap/Shoulder Belt with Locking Latch Plate Locking clip provided withTo Install Locking Clip Connect lap and shoulder belts as shownWith Latch Open harness clip Using Car Seat with Built-in HarnessPositioning the Harness Straps Place child in the seatIf straps are in the proper slots, go to on Reassemble straps onto adjuster bar exactly as shown Push adjuster bar down Rotate red lock downHarness Adjustment See also .3, Securing Your Child in the Car Seat,Securing the Car Seat in Your Vehicle With a Vehicle Lap or Lap/shoulder BeltSafety Check for Secure Installation Tighten vehicle seat beltVehicle belt must stay tight. Car seat must be very tight Hook Latch Never put two Latch connectors on oneThread Latch Belt must lay flat and not be twistedSafety Check for Secure Installation All Latch seating Positions have tetherSecuring Your Child in the Car Seat Check that straps are not twistedPage Using Car Seat Without Built-in Harness For more help Open chest clip Harness RemovalRemove harness straps Remove crotch strap. See on page 19 for more helpSecuring Child and Booster Seat in Vehicle Using the Tether Additional informationTighten the tether strap securely Storing Latch Latch storageAirplane Use Cupholder on certain modelsCare and Maintenance Buckle and Harness Adjuster clean with a damp clothTo Remove Seat Cover Remove elasticPreceding instructions Replacement Parts How to OrderHarness strap with buckle tongues Model No LatchAsiento para automóvil/ asiento para niños Uso del asiento para automóvil con el Arnés incorporado Uso del asiento para automóvil sin elInformación adicional Advertencias a padres y otros usuarios La seguridad de su niño depende deSujetar a su niño correctamente en el asiento de seguridad Información sobre el retiro de productos del mercado Información sobre el registroRegistre su asiento para automóvil Por favor, complete la información que se solicitaCaracterísticas Si necesita ayudaApoya vasos ciertos modelos Conector del la soga ArnésInformación importante AdvertenciasSegún las estadísticas de accidentes, LOS Page Limitaciones de peso y altura CON el arnés incorporado SIN el arnés incorporadoUbicación del asiento para automóvil Requisitos del asiento Del vehículoRequisitos del cinturón de seguridad del vehículo Sistemas Peligrosos de cinturones de vehículosCinturones de regazo con Está conectada a la placa de seguridad en la otra punta Sistemas Seguros de cinturones de vehículos Para el arnés incorporado solamenteCon O sin el arnés incorporado Del vehículoPara instalar la traba de seguridad Con Latch Pliegue del Asiento Del vehículoUso del asiento para automóvil CON el arnés incorporado Colocación de las correas Del arnésColoque al niño en el asiento Page Gire la traba roja hacia abajo Ajuste del arnés Vea también la Sección 6.3, Asegurar aPase el cinturón de seguridad Asegurar el asiento para automóvil en su vehículoCon el cinturón del vehículo de regazo o regazo/hombro Para el cinturón De regazo solamenteVerificación de seguridad para una instalación segura Ajuste el cinturón de seguridad del vehículoColoque el asiento para Adelante Pase el LatchEl cinturón debe mantenerse en posición plana sin torcerse Verificación de seguridad para una instalación segura Asegurar a su niño en el asiento del automóvil No use el asiento para automóvil si el arnés no se trabaPage Uso del asiento para automóvil SIN el arnés incorporado Si el niño no puede mantener elEliminación del arnés Saque las correas delObtener más ayuda Desabroche el gancho del pecho Asegurar al niño y el asiento para niños en el vehículo Información adicional Uso de la sogaEl arnés Almacenamiento del Latch Uso en aeronaves Apoya vasos En ciertos modelosPuntos importantes que recordar Cuidado y mantenimiento Para sacar la funda del asiento Eliminación del Arnés, páginas Para obtener AyudaPiezas de repuesto Cómo hacer pedidosModel No. N de modelo Ship to Enviar a

8490, 8486 specifications

The Graco 8490 and 8486 are highly regarded models in the world of airless paint sprayers, designed to meet the demands of both professionals and DIY enthusiasts. These sprayers stand out due to their exceptional performance, durability, and user-friendly features, making them ideal for a variety of painting projects.

One of the main features of the Graco 8490 is its powerful motor, which is capable of delivering a consistent flow of paint. This ensures a smooth and even application, allowing users to achieve a professional finish with ease. The 8486 model, while slightly less powerful, still provides a reliable performance for lighter projects. Both models boast a high outlet pressure, which enables users to spray thicker materials and achieve better coverage in fewer coats.

The Graco 8490 comes equipped with the SmartControl technology, which ensures a consistent spray fan regardless of the pressure setting. This feature greatly enhances control during the painting process, allowing users to adjust the spray pattern according to their needs. The 8486 model, on the other hand, offers a simplified control system that is easy to operate, making it an excellent choice for those new to airless sprayers.

Durability is another key characteristic of these Graco models. Constructed with high-quality materials, both the 8490 and 8486 are built to withstand the rigors of frequent use. The design incorporates a sturdy frame and features like a built-in carrying handle for added convenience. Additionally, the easy-to-clean design helps maintain the sprayer's functionality over time, reducing the need for extensive maintenance.

Both models also come with Graco's proven RAC (Reverse-A-Clean) tip system, which allows for easy cleaning and quick tip replacement. This feature minimizes downtime and enhances the overall efficiency of the painting process.

In summary, the Graco 8490 and 8486 are exceptional airless paint sprayers that deliver superior performance, durability, and user-friendly features. Their innovative technologies, such as SmartControl and the RAC tip system, make them ideal choices for anyone looking to achieve a flawless paint job, whether for professional or personal projects. With these sprayers, users can expect consistent results and a seamless painting experience.