Graco 8486 Tighten vehicle seat belt, Vehicle belt must stay tight. Car seat must be very tight

Page 23

4.Tighten vehicle seat belt

Push down hard with your knee or free hand in the middle of the car seat ￿. Then pull and tighten the vehicle belt.

For more information on how to tighten the belt for your seat belt system, see Section 5.2 Vehicle Seat Belt Requirements, pp. 12-16, or your vehicle owner’s manual.

5.If you want to use tether to hold seat in place, secure it now. See Section 8.1 Using the Tether, page 31.

When not using the tether, hook it on the tether storage bar on the back of the seat.

6.Safety Check for Secure Installation

Perform this test every time you drive with your child.

Twist and pull car seat front to back and left to right to check that seat is secure

￿. Vehicle belt must stay tight. Car seat must be very tight.

If car seat is not secure or loose, repeat procedure OR find another location for the seat, see Section 5.0 Car Seat Location, pp. 11-17.

￿

￿

23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Understand the instructions in this manual Car Seat/Booster SeatTable of Contents Properly securing your child in the car seat Your child’s safety depends onIf You Need Help Registration InformationRegister Your Car Seat Recall InformationCupholder certain models FeaturesAdjuster Never Leave Your Child Unattended Important InformationPage Height and Weight Limits Without Built-in Harness With Built-in HarnessVehicle Seat Requirements Car Seat LocationLap Belts with Emergency Vehicle Seat Belt RequirementsUnsafe Vehicle Belt Systems Combination Lap/Shoulder Belt with Retractor Safe Vehicle Belt Systems For Built-in Harness Only Lap Belts Manually AdjustedLocking clip provided with With or Without Built-in HarnessCombination Lap/Shoulder Belt with Locking Latch Plate Combination Lap/Shoulder Belt with Sliding Latch PlateConnect lap and shoulder belts as shown To Install Locking ClipWith Latch Place child in the seat Using Car Seat with Built-in HarnessPositioning the Harness Straps Open harness clipIf straps are in the proper slots, go to on Push adjuster bar down Rotate red lock down Reassemble straps onto adjuster bar exactly as shownSee also .3, Securing Your Child in the Car Seat, Harness AdjustmentWith a Vehicle Lap or Lap/shoulder Belt Securing the Car Seat in Your VehicleVehicle belt must stay tight. Car seat must be very tight Safety Check for Secure InstallationTighten vehicle seat belt Belt must lay flat and not be twisted Never put two Latch connectors on oneThread Latch Hook LatchAll Latch seating Positions have tether Safety Check for Secure InstallationCheck that straps are not twisted Securing Your Child in the Car SeatPage Using Car Seat Without Built-in Harness Remove crotch strap. See on page 19 for more help Harness RemovalRemove harness straps For more help Open chest clipSecuring Child and Booster Seat in Vehicle Tighten the tether strap securely Using the TetherAdditional information Latch storage Storing LatchCupholder on certain models Airplane UseBuckle and Harness Adjuster clean with a damp cloth Care and MaintenancePreceding instructions To Remove Seat CoverRemove elastic Harness strap with buckle tongues Replacement PartsHow to Order Latch Model NoAsiento para automóvil/ asiento para niños Información adicional Uso del asiento para automóvil con el Arnés incorporadoUso del asiento para automóvil sin el Sujetar a su niño correctamente en el asiento de seguridad Advertencias a padres y otros usuariosLa seguridad de su niño depende de Por favor, complete la información que se solicita Información sobre el registroRegistre su asiento para automóvil Información sobre el retiro de productos del mercadoApoya vasos ciertos modelos CaracterísticasSi necesita ayuda Arnés Conector del la sogaSegún las estadísticas de accidentes, LOS Información importanteAdvertencias Page Limitaciones de peso y altura SIN el arnés incorporado CON el arnés incorporadoRequisitos del asiento Del vehículo Ubicación del asiento para automóvilCinturones de regazo con Requisitos del cinturón de seguridad del vehículoSistemas Peligrosos de cinturones de vehículos Está conectada a la placa de seguridad en la otra punta Para el arnés incorporado solamente Sistemas Seguros de cinturones de vehículosDel vehículo Con O sin el arnés incorporadoPara instalar la traba de seguridad Pliegue del Asiento Del vehículo Con LatchColoque al niño en el asiento Uso del asiento para automóvil CON el arnés incorporadoColocación de las correas Del arnés Page Gire la traba roja hacia abajo Vea también la Sección 6.3, Asegurar a Ajuste del arnésPara el cinturón De regazo solamente Asegurar el asiento para automóvil en su vehículoCon el cinturón del vehículo de regazo o regazo/hombro Pase el cinturón de seguridadAjuste el cinturón de seguridad del vehículo Verificación de seguridad para una instalación seguraEl cinturón debe mantenerse en posición plana sin torcerse Coloque el asiento paraAdelante Pase el Latch Verificación de seguridad para una instalación segura No use el asiento para automóvil si el arnés no se traba Asegurar a su niño en el asiento del automóvilPage Si el niño no puede mantener el Uso del asiento para automóvil SIN el arnés incorporadoObtener más ayuda Desabroche el gancho del pecho Eliminación del arnésSaque las correas del Asegurar al niño y el asiento para niños en el vehículo El arnés Información adicionalUso de la soga Almacenamiento del Latch Puntos importantes que recordar Uso en aeronavesApoya vasos En ciertos modelos Cuidado y mantenimiento Eliminación del Arnés, páginas Para obtener Ayuda Para sacar la funda del asientoCómo hacer pedidos Piezas de repuestoShip to Enviar a Model No. N de modelo

8490, 8486 specifications

The Graco 8490 and 8486 are highly regarded models in the world of airless paint sprayers, designed to meet the demands of both professionals and DIY enthusiasts. These sprayers stand out due to their exceptional performance, durability, and user-friendly features, making them ideal for a variety of painting projects.

One of the main features of the Graco 8490 is its powerful motor, which is capable of delivering a consistent flow of paint. This ensures a smooth and even application, allowing users to achieve a professional finish with ease. The 8486 model, while slightly less powerful, still provides a reliable performance for lighter projects. Both models boast a high outlet pressure, which enables users to spray thicker materials and achieve better coverage in fewer coats.

The Graco 8490 comes equipped with the SmartControl technology, which ensures a consistent spray fan regardless of the pressure setting. This feature greatly enhances control during the painting process, allowing users to adjust the spray pattern according to their needs. The 8486 model, on the other hand, offers a simplified control system that is easy to operate, making it an excellent choice for those new to airless sprayers.

Durability is another key characteristic of these Graco models. Constructed with high-quality materials, both the 8490 and 8486 are built to withstand the rigors of frequent use. The design incorporates a sturdy frame and features like a built-in carrying handle for added convenience. Additionally, the easy-to-clean design helps maintain the sprayer's functionality over time, reducing the need for extensive maintenance.

Both models also come with Graco's proven RAC (Reverse-A-Clean) tip system, which allows for easy cleaning and quick tip replacement. This feature minimizes downtime and enhances the overall efficiency of the painting process.

In summary, the Graco 8490 and 8486 are exceptional airless paint sprayers that deliver superior performance, durability, and user-friendly features. Their innovative technologies, such as SmartControl and the RAC tip system, make them ideal choices for anyone looking to achieve a flawless paint job, whether for professional or personal projects. With these sprayers, users can expect consistent results and a seamless painting experience.
Top Page Image Contents