Graco 8490, 8486 manual

Page 8

STOP USING CAR SEAT AND THROW IT AWAY after the date molded into the back of the car seat.

DO NOT MODIFY YOUR CAR SEAT or use any accessories or parts supplied by other manufacturers.

NEVER USE CAR SEAT IF IT HAS DAMAGED OR MISSING PARTS. DO NOT use a cut, frayed or damaged car seat harness, LATCH belt or vehicle seat belt.

THE CAR SEAT CAN BECOME VERY HOT IF LEFT IN THE SUN. Contact with these parts can burn your child’s skin. Always touch the surface of any metal or plastic parts before putting your child in the car seat.

THIS CHILD RESTRAINT CONFORMS to all applicable Federal Motor Vehicle Safety Standards and is certified for use in motor vehicles. It is certified for use in Aircraft ONLY when used with the built-in harness. When used as a booster without the harness, this restraint is NOT certified for use in aircraft.

NEVER GIVE THIS CAR SEAT to someone else without also giving them this manual.

NEVER USE A SECOND-HAND CAR SEAT or a car seat whose history you do not know.

8

Image 8
Contents Car Seat/Booster Seat Understand the instructions in this manualTable of Contents Your child’s safety depends on Properly securing your child in the car seatRegistration Information Register Your Car SeatRecall Information If You Need HelpFeatures Cupholder certain modelsAdjuster Important Information Never Leave Your Child UnattendedPage Height and Weight Limits With Built-in Harness Without Built-in HarnessCar Seat Location Vehicle Seat RequirementsLap Belts with Emergency Vehicle Seat Belt RequirementsUnsafe Vehicle Belt Systems Combination Lap/Shoulder Belt with Retractor Lap Belts Manually Adjusted Safe Vehicle Belt Systems For Built-in Harness OnlyWith or Without Built-in Harness Combination Lap/Shoulder Belt with Locking Latch PlateCombination Lap/Shoulder Belt with Sliding Latch Plate Locking clip provided withTo Install Locking Clip Connect lap and shoulder belts as shownWith Latch Using Car Seat with Built-in Harness Positioning the Harness StrapsOpen harness clip Place child in the seatIf straps are in the proper slots, go to on Reassemble straps onto adjuster bar exactly as shown Push adjuster bar down Rotate red lock downHarness Adjustment See also .3, Securing Your Child in the Car Seat,Securing the Car Seat in Your Vehicle With a Vehicle Lap or Lap/shoulder BeltVehicle belt must stay tight. Car seat must be very tight Safety Check for Secure InstallationTighten vehicle seat belt Never put two Latch connectors on one Thread LatchHook Latch Belt must lay flat and not be twistedSafety Check for Secure Installation All Latch seating Positions have tetherSecuring Your Child in the Car Seat Check that straps are not twistedPage Using Car Seat Without Built-in Harness Harness Removal Remove harness strapsFor more help Open chest clip Remove crotch strap. See on page 19 for more helpSecuring Child and Booster Seat in Vehicle Tighten the tether strap securely Using the TetherAdditional information Storing Latch Latch storageAirplane Use Cupholder on certain modelsCare and Maintenance Buckle and Harness Adjuster clean with a damp clothPreceding instructions To Remove Seat CoverRemove elastic Harness strap with buckle tongues Replacement PartsHow to Order Model No LatchAsiento para automóvil/ asiento para niños Información adicional Uso del asiento para automóvil con el Arnés incorporadoUso del asiento para automóvil sin el Sujetar a su niño correctamente en el asiento de seguridad Advertencias a padres y otros usuariosLa seguridad de su niño depende de Información sobre el registro Registre su asiento para automóvilInformación sobre el retiro de productos del mercado Por favor, complete la información que se solicitaApoya vasos ciertos modelos CaracterísticasSi necesita ayuda Conector del la soga ArnésSegún las estadísticas de accidentes, LOS Información importanteAdvertencias Page Limitaciones de peso y altura CON el arnés incorporado SIN el arnés incorporadoUbicación del asiento para automóvil Requisitos del asiento Del vehículoCinturones de regazo con Requisitos del cinturón de seguridad del vehículoSistemas Peligrosos de cinturones de vehículos Está conectada a la placa de seguridad en la otra punta Sistemas Seguros de cinturones de vehículos Para el arnés incorporado solamenteCon O sin el arnés incorporado Del vehículoPara instalar la traba de seguridad Con Latch Pliegue del Asiento Del vehículoColoque al niño en el asiento Uso del asiento para automóvil CON el arnés incorporadoColocación de las correas Del arnés Page Gire la traba roja hacia abajo Ajuste del arnés Vea también la Sección 6.3, Asegurar aAsegurar el asiento para automóvil en su vehículo Con el cinturón del vehículo de regazo o regazo/hombroPase el cinturón de seguridad Para el cinturón De regazo solamenteVerificación de seguridad para una instalación segura Ajuste el cinturón de seguridad del vehículoEl cinturón debe mantenerse en posición plana sin torcerse Coloque el asiento paraAdelante Pase el Latch Verificación de seguridad para una instalación segura Asegurar a su niño en el asiento del automóvil No use el asiento para automóvil si el arnés no se trabaPage Uso del asiento para automóvil SIN el arnés incorporado Si el niño no puede mantener elObtener más ayuda Desabroche el gancho del pecho Eliminación del arnésSaque las correas del Asegurar al niño y el asiento para niños en el vehículo El arnés Información adicionalUso de la soga Almacenamiento del Latch Puntos importantes que recordar Uso en aeronavesApoya vasos En ciertos modelos Cuidado y mantenimiento Para sacar la funda del asiento Eliminación del Arnés, páginas Para obtener AyudaPiezas de repuesto Cómo hacer pedidosModel No. N de modelo Ship to Enviar a

8490, 8486 specifications

The Graco 8490 and 8486 are highly regarded models in the world of airless paint sprayers, designed to meet the demands of both professionals and DIY enthusiasts. These sprayers stand out due to their exceptional performance, durability, and user-friendly features, making them ideal for a variety of painting projects.

One of the main features of the Graco 8490 is its powerful motor, which is capable of delivering a consistent flow of paint. This ensures a smooth and even application, allowing users to achieve a professional finish with ease. The 8486 model, while slightly less powerful, still provides a reliable performance for lighter projects. Both models boast a high outlet pressure, which enables users to spray thicker materials and achieve better coverage in fewer coats.

The Graco 8490 comes equipped with the SmartControl technology, which ensures a consistent spray fan regardless of the pressure setting. This feature greatly enhances control during the painting process, allowing users to adjust the spray pattern according to their needs. The 8486 model, on the other hand, offers a simplified control system that is easy to operate, making it an excellent choice for those new to airless sprayers.

Durability is another key characteristic of these Graco models. Constructed with high-quality materials, both the 8490 and 8486 are built to withstand the rigors of frequent use. The design incorporates a sturdy frame and features like a built-in carrying handle for added convenience. Additionally, the easy-to-clean design helps maintain the sprayer's functionality over time, reducing the need for extensive maintenance.

Both models also come with Graco's proven RAC (Reverse-A-Clean) tip system, which allows for easy cleaning and quick tip replacement. This feature minimizes downtime and enhances the overall efficiency of the painting process.

In summary, the Graco 8490 and 8486 are exceptional airless paint sprayers that deliver superior performance, durability, and user-friendly features. Their innovative technologies, such as SmartControl and the RAC tip system, make them ideal choices for anyone looking to achieve a flawless paint job, whether for professional or personal projects. With these sprayers, users can expect consistent results and a seamless painting experience.