Graco PD247333A Without Built-in Harness, Mass between 13.6 and 45 kg +HLJKWWRLQFKHV

Page 17

7.2 WITHOUT Built-in Harness

Your child must meet all requirements: :HLJKWWROEV

(mass between 13.6 and 45 kg) +HLJKWWRLQFKHV

(96 and 145 cm) in height DSSUR[LPDWHO\\HDUVRIDJH WKHVKRXOGHUEHOWMUST lie across child’s shoulder as shown and the lap portion of the belt is positionned low on the child’s hips. &KLOG¶VHDUVDUHBELOW top of booster seat. ,IWRSVRIHDUVDUHDERYHWRSRIVHDWFKLOGLVWRR large for booster seat.

If child is between 30 and 65 lbs and shoulders are below the upper harness slots, we highly recommend use of the built-in harness for as long as possible (up to 65 lbs).

17

Image 17

Contents Read this Manual Table of Contents Table of Contents Page Properly securing your child in the child restraint Properly routing the vehicle seat belt or LatchRegister Your Child Restraint Model Number Date of Manufacture Purchase Date&HUWLÀFDWLRQ Features Page Arm Assembling the Child RestraintClick Click Assembly is now complete ‡DO not Install or USE this Child Page With Built-In Harness Height and Weight LimitationsMass between 13.6 and 45 kg ‡+HLJKWWRLQFKHV Without Built-in Harness‡DQGDUHEHWZHHQDQGLQFKHV Without Back SupportChoosing an Appropriate Vehicle Seat Location Safe Vehicle Seat Belt Systems Vehicle Seat Belt Requirements‡ Lap Belts with Automatic Locking Retractor ALR For Built-in Harness OnlyWith or Without Built-in Harness When using booster seat WithoutRepeat above steps until secure 2 1.25 cm To Install Locking Clip‡ Passive Restraint Lap or Shoulder Belt Mounted on Door Unsafe Vehicle Belt Systems‡ Lap Belts with Emergency Locking Retractor ELR ‡ Lap Belts Forward of Seat Crease ‡ Passive Restraint Lap Belt with Motorized Shoulder BeltLatch What is LATCH?Page Latch System Page Using Child Restraint with Built-in Harness Unbuckle harness straps œ 7RDGMXVWKDUQHVVVWUDSV Harness straps must go into the slots¡ ¢ Must Page Securing the Child Restraint in Your Vehicle Lower anchors must be stored when using vehicle beltRFDWLRQS Safety Check for Secure InstallationTighten vehicle seat belt Lay flat and not be twisted With LatchWKH7HWKHUSDJH ‡Avoid bulky clothing Securing Your Child in the Child RestraintFasten harness clip š. Position harness Remove harness straps Harness Removal or Re-attaching HarnessPage 2QWKHUHDURIWKHVHDWGHWDFKORZHUVHDW Harness Strap Arm Page Using Your Child Restraint Without Built-in Harness Incorrectincorrect Incorrect Incorrect Securing Child & Booster Seat in Vehicle When using with or without the built-in Harness Adjusting Head SupportRemoving or Re-attaching Back Support Page Page Page Page Rear View of Child Sitting in Seat Correct Using the Tether Storing Lower Anchors and Tether Latch Important points to remember Airplane UsePlacement of the chest clip at armpit level Body Support & Harness Covers Recline Foot ™ › ž œCare and Maintenance 3UHYHQWVHULRXVLQMXU\RUGHDWK Buckle Cleaning ProcessBleach To Remove or Re-attach Seat CoverReplacement Parts and Warranty

Related manuals

Manual 136 pages 29.39 Kb