Graco PD247333A owner manual Must

Page 34

8. Use plastic strap guides as a guide to feed the harness up over the red rollers. Make sure to feed straps OVER red rollers and plastic strap guides .

Make sure that the tether strap does not interfere when changing the harness strap height positions.

9. If the straps are not fed OVERWKHUHGUROOHUVWKH assembly is incorrect and MUST be corrected before using child restraint.

10. Reassemble straps onto metal junction plate exactly as shown .

Check that straps are completely within the slots and that they are not twisted.

	Harness
	straps
	MUST
	go over
	red
	rollers.

34

Image 34

Contents Read this Manual Table of Contents Table of Contents Page Properly routing the vehicle seat belt or Latch Properly securing your child in the child restraintModel Number Date of Manufacture Purchase Date Register Your Child Restraint&HUWLÀFDWLRQ Features Page Assembling the Child Restraint ArmClick Click Assembly is now complete ‡DO not Install or USE this Child Page Height and Weight Limitations With Built-In HarnessWithout Built-in Harness Mass between 13.6 and 45 kg ‡+HLJKWWRLQFKHVWithout Back Support ‡DQGDUHEHWZHHQDQGLQFKHVChoosing an Appropriate Vehicle Seat Location Vehicle Seat Belt Requirements Safe Vehicle Seat Belt SystemsFor Built-in Harness Only ‡ Lap Belts with Automatic Locking Retractor ALRWhen using booster seat Without With or Without Built-in HarnessTo Install Locking Clip Repeat above steps until secure 2 1.25 cm‡ Lap Belts with Emergency Locking Retractor ELR Unsafe Vehicle Belt Systems‡ Passive Restraint Lap or Shoulder Belt Mounted on Door ‡ Passive Restraint Lap Belt with Motorized Shoulder Belt ‡ Lap Belts Forward of Seat CreaseWhat is LATCH? LatchPage Latch System Page Using Child Restraint with Built-in Harness Unbuckle harness straps œ Harness straps must go into the slots 7RDGMXVWKDUQHVVVWUDSV¡ ¢ Must Page Lower anchors must be stored when using vehicle belt Securing the Child Restraint in Your VehicleTighten vehicle seat belt Safety Check for Secure InstallationRFDWLRQS With Latch Lay flat and not be twistedWKH7HWKHUSDJH Securing Your Child in the Child Restraint ‡Avoid bulky clothingFasten harness clip š. Position harness Harness Removal or Re-attaching Harness Remove harness strapsPage 2QWKHUHDURIWKHVHDWGHWDFKORZHUVHDW Harness Strap Arm Page Using Your Child Restraint Without Built-in Harness Incorrectincorrect Incorrect Incorrect Securing Child & Booster Seat in Vehicle Adjusting Head Support When using with or without the built-in HarnessRemoving or Re-attaching Back Support Page Page Page Page Rear View of Child Sitting in Seat Correct Using the Tether Storing Lower Anchors and Tether Latch Airplane Use Important points to rememberPlacement of the chest clip at armpit level Body Support & Harness Covers ™ › ž œ Recline FootCare and Maintenance Buckle Cleaning Process 3UHYHQWVHULRXVLQMXU\RUGHDWKTo Remove or Re-attach Seat Cover BleachReplacement Parts and Warranty

Related manuals

Manual 136 pages 29.39 Kb