Graco PD247333A owner manual Without Back Support, ‡DqgDuhEhwzhhqDqgLqfkhv

Page 18

7.3 WITHOUT Back Support

Your child must meet all requirements: ‡ZHLJKEHWZHHQDQGOEV

 PDVVEHWZHHQDQGNJ 

‡DQGDUHEHWZHHQDQGLQFKHV

 DQGFP LQKHLJKW

‡DSSUR[LPDWHO\\HDUVRIDJH ‡WKHVKRXOGHUEHOWMUST lie across child’s shoulder as shown and the lap portion of the belt is positionned low on the child’s hips.

:KHQVLWWLQJRQWKHERRVWHUVHDW\RXUFKLOG¶V ears should be below the top of the vehicle seat cushion / head rest.

Your Graco booster seat can be used with or without the back support as long as all requirements are met.

18

Image 18
Contents Read this Manual Table of Contents Table of Contents Page Properly routing the vehicle seat belt or Latch Properly securing your child in the child restraintModel Number Date of Manufacture Purchase Date Register Your Child Restraint&HUWLÀFDWLRQ Features Page Assembling the Child Restraint ArmClick Click Assembly is now complete ‡DO not Install or USE this Child Page Height and Weight Limitations With Built-In HarnessWithout Built-in Harness Mass between 13.6 and 45 kg ‡+HLJKWWRLQFKHVWithout Back Support ‡DQGDUHEHWZHHQDQGLQFKHVChoosing an Appropriate Vehicle Seat Location Vehicle Seat Belt Requirements Safe Vehicle Seat Belt SystemsFor Built-in Harness Only ‡ Lap Belts with Automatic Locking Retractor ALRWhen using booster seat Without With or Without Built-in HarnessTo Install Locking Clip Repeat above steps until secure 2 1.25 cmUnsafe Vehicle Belt Systems ‡ Lap Belts with Emergency Locking Retractor ELR‡ Passive Restraint Lap or Shoulder Belt Mounted on Door ‡ Passive Restraint Lap Belt with Motorized Shoulder Belt ‡ Lap Belts Forward of Seat CreaseWhat is LATCH? LatchPage Latch System Page Using Child Restraint with Built-in Harness Unbuckle harness straps œ Harness straps must go into the slots 7RDGMXVWKDUQHVVVWUDSV¡ ¢ Must Page Lower anchors must be stored when using vehicle belt Securing the Child Restraint in Your VehicleSafety Check for Secure Installation Tighten vehicle seat beltRFDWLRQS With Latch Lay flat and not be twistedWKH7HWKHUSDJH Securing Your Child in the Child Restraint ‡Avoid bulky clothingFasten harness clip š. Position harness Harness Removal or Re-attaching Harness Remove harness strapsPage 2QWKHUHDURIWKHVHDWGHWDFKORZHUVHDW Harness Strap Arm Page Using Your Child Restraint Without Built-in Harness Incorrectincorrect Incorrect Incorrect Securing Child & Booster Seat in Vehicle Adjusting Head Support When using with or without the built-in HarnessRemoving or Re-attaching Back Support Page Page Page Page Rear View of Child Sitting in Seat Correct Using the Tether Storing Lower Anchors and Tether Latch Airplane Use Important points to rememberPlacement of the chest clip at armpit level Body Support & Harness Covers ™ › ž œ Recline FootCare and Maintenance Buckle Cleaning Process 3UHYHQWVHULRXVLQMXU\RUGHDWKTo Remove or Re-attach Seat Cover BleachReplacement Parts and Warranty
Related manuals
Manual 136 pages 29.39 Kb