Graco PD247333A owner manual

Page 27

NOTE: Some vehicle manufacturers have lower maximum weight ratings for LATCH anchors, so you must consult your vehicle owner’s manual or call the vehicle manufacturer to confirm the limits on your vehicle’s LATCH anchors.

Use vehicle belt (not LATCH connectors) for installations with children weighing more than 48 pounds (21.7 kg).

See your vehicle owner’s manual for exact locations, anchor identification, and requirements for use with a child restraint.

Vehicle

Seat Crease

Vehicle Lower Anchor Points

Vehicle Top Tether

Anchor Points

Typical seat in a

passenger vehicle. Other vehicle types may have different LATCH locations.

27

Image 27
Contents Read this Manual Table of Contents Table of Contents Page Properly securing your child in the child restraint Properly routing the vehicle seat belt or LatchRegister Your Child Restraint Model Number Date of Manufacture Purchase Date&HUWLÀFDWLRQ Features Page Arm Assembling the Child RestraintClick Click Assembly is now complete ‡DO not Install or USE this Child Page With Built-In Harness Height and Weight LimitationsMass between 13.6 and 45 kg ‡+HLJKWWRLQFKHV Without Built-in Harness‡DQGDUHEHWZHHQDQGLQFKHV Without Back SupportChoosing an Appropriate Vehicle Seat Location Safe Vehicle Seat Belt Systems Vehicle Seat Belt Requirements‡ Lap Belts with Automatic Locking Retractor ALR For Built-in Harness OnlyWith or Without Built-in Harness When using booster seat WithoutRepeat above steps until secure 2 1.25 cm To Install Locking ClipUnsafe Vehicle Belt Systems ‡ Lap Belts with Emergency Locking Retractor ELR‡ Passive Restraint Lap or Shoulder Belt Mounted on Door ‡ Lap Belts Forward of Seat Crease ‡ Passive Restraint Lap Belt with Motorized Shoulder BeltLatch What is LATCH?Page Latch System Page Using Child Restraint with Built-in Harness Unbuckle harness straps œ 7RDGMXVWKDUQHVVVWUDSV Harness straps must go into the slots¡ ¢ Must Page Securing the Child Restraint in Your Vehicle Lower anchors must be stored when using vehicle beltSafety Check for Secure Installation Tighten vehicle seat beltRFDWLRQS Lay flat and not be twisted With LatchWKH7HWKHUSDJH ‡Avoid bulky clothing Securing Your Child in the Child RestraintFasten harness clip š. Position harness Remove harness straps Harness Removal or Re-attaching HarnessPage 2QWKHUHDURIWKHVHDWGHWDFKORZHUVHDW Harness Strap Arm Page Using Your Child Restraint Without Built-in Harness Incorrectincorrect Incorrect Incorrect Securing Child & Booster Seat in Vehicle When using with or without the built-in Harness Adjusting Head SupportRemoving or Re-attaching Back Support Page Page Page Page Rear View of Child Sitting in Seat Correct Using the Tether Storing Lower Anchors and Tether Latch Important points to remember Airplane UsePlacement of the chest clip at armpit level Body Support & Harness Covers Recline Foot ™ › ž œCare and Maintenance 3UHYHQWVHULRXVLQMXU\RUGHDWK Buckle Cleaning ProcessBleach To Remove or Re-attach Seat CoverReplacement Parts and Warranty
Related manuals
Manual 136 pages 29.39 Kb