Graco PD247333A owner manual With Latch, Lay flat and not be twisted

Page 38

11.3 With LATCH

Use vehicle belt (not LATCH connectors) for installations with children weighing more than 48 pounds (21.7 kg). NOTE: Some vehicle manufacturers have lower maximum weight ratings for LATCHDQFKRUVVR\RXPXVW consult your vehicle owner’s manual or call the vehicle manufacturer to confirm the limits on your vehicle’s LATCH anchors.

1. Unhook LATCH from storage bars on the VLGHVRIWKHVHDW)RUHDVHRILQVWDOODWLRQH[WHQG LATCH to its maximum length.

	2. Place the child restraint firmly against the back
	of a forward-facing vehicle seat.
	3. Hook LATCH Connectors to vehicle lower
	anchors . Pull firmly on Connectors
	to be sure they are attached. Belt must
	lay flat and not be twisted.
	4. Tighten LATCH by pushing down hard on
	4. Tighten LATCH by pushing down hard on
	child restraint and pulling the adjustment belt .
	5. If you need to remove LATCHWRUHDGMXVW
	push button on LATCH buckle to loosen strap.
	38

Image 38

Contents Read this Manual Table of Contents Table of Contents Page Properly routing the vehicle seat belt or Latch Properly securing your child in the child restraintModel Number Date of Manufacture Purchase Date Register Your Child Restraint&HUWLÀFDWLRQ Features Page Assembling the Child Restraint ArmClick Click Assembly is now complete ‡DO not Install or USE this Child Page Height and Weight Limitations With Built-In HarnessWithout Built-in Harness Mass between 13.6 and 45 kg ‡+HLJKWWRLQFKHVWithout Back Support ‡DQGDUHEHWZHHQDQGLQFKHVChoosing an Appropriate Vehicle Seat Location Vehicle Seat Belt Requirements Safe Vehicle Seat Belt SystemsFor Built-in Harness Only ‡ Lap Belts with Automatic Locking Retractor ALRWhen using booster seat Without With or Without Built-in HarnessTo Install Locking Clip Repeat above steps until secure 2 1.25 cm‡ Passive Restraint Lap or Shoulder Belt Mounted on Door Unsafe Vehicle Belt Systems‡ Lap Belts with Emergency Locking Retractor ELR ‡ Passive Restraint Lap Belt with Motorized Shoulder Belt ‡ Lap Belts Forward of Seat CreaseWhat is LATCH? LatchPage Latch System Page Using Child Restraint with Built-in Harness Unbuckle harness straps œ Harness straps must go into the slots 7RDGMXVWKDUQHVVVWUDSV¡ ¢ Must Page Lower anchors must be stored when using vehicle belt Securing the Child Restraint in Your VehicleRFDWLRQS Safety Check for Secure InstallationTighten vehicle seat belt With Latch Lay flat and not be twistedWKH7HWKHUSDJH Securing Your Child in the Child Restraint ‡Avoid bulky clothingFasten harness clip š. Position harness Harness Removal or Re-attaching Harness Remove harness strapsPage 2QWKHUHDURIWKHVHDWGHWDFKORZHUVHDW Harness Strap Arm Page Using Your Child Restraint Without Built-in Harness Incorrectincorrect Incorrect Incorrect Securing Child & Booster Seat in Vehicle Adjusting Head Support When using with or without the built-in HarnessRemoving or Re-attaching Back Support Page Page Page Page Rear View of Child Sitting in Seat Correct Using the Tether Storing Lower Anchors and Tether Latch Airplane Use Important points to rememberPlacement of the chest clip at armpit level Body Support & Harness Covers ™ › ž œ Recline FootCare and Maintenance Buckle Cleaning Process 3UHYHQWVHULRXVLQMXU\RUGHDWKTo Remove or Re-attach Seat Cover BleachReplacement Parts and Warranty

Related manuals

Manual 136 pages 29.39 Kb