Adcom GFR-700HD user manual Room 2 Basic Configuration, Mute, Advanced Settings

Room 2 Basic Configuration

What input source do you want to play in Room 2? Once that is specified, you have the option of fine tuning audio levels depending on the requirements of your Room 2 audio system.

To access the Room 2 Configuration menu:

1Press the Main button on the remote control.

2 Press the Setup button.

3 Use the / buttons to select ROOM 2 CONFIG, then press the Select button.

•Note: You can also access the Room 2 Con- figuration menu by pressing the Room Two Setup button on the GFR-700HD front panel.

4Use the / buttons to choose from the follow- ing menu items:

ROOM 2

Enables Room 2 playback. Use the / buttons to select:

•On or Off

MUTE

Mutes Room 2 audio. Use the / buttons to se- lect:

•On or Off

•If the Room 2 setting is Off, you will not be able to set Mute to On.

INPUT

Sets the audio input for Room 2. Use the / but- tons to select:

•Video 2, Video 3, Video 4, CD, Tuner AM, or Tun- er FM

•When Room 2 is enabled, the selected input source will be sent from the Zone 2 Outputs on the GFR-700HD rear panel to the audio inputs of your Room 2 receiver.

VOLUME

Adjusts the volume level of the Room 2 audio signal. Use the / buttons to set the volume level:

•The available range is -65 dB to 0 dB.

•The default setting is -40 dB.

ADVANCED SETTINGS

See page 42.

Chapter 3 - Setup

www.adcom.com GFR-700HD Owner’s Manual 41