Adcom GFR-700HD Remote Control Setup, Using Preprogrammed Commands, Programming Remote Commands

Chapter 3 - Setup

Remote Control Setup

The GFR-700HD is a learning remote control that is capable of storing and executing commands for all remote controls in your home theater system. In this way, you can eliminate the confusion of using mul- tiple remotes.

This section is divided into two main parts:
Using Preprogrammed Commands
The first section is an overview of the preprogrammed
commands for each source:
•	Main commands	39
•	Video 1~3 commands	39
• Video 4 commands (GDV-850)		40
•	CD commands (GCD-750)	40
•	Tuner commands	41
•	Rm 2 commands	41

Note: Main commands are not programmable, except for the four user macros (M1, M2, M3, and M4).

Programming Remote Commands
The second section includes instructions for pro-
gramming the remote for each source:
•	Programming commands	39
•	Deleting commands	40

•Deleting all commands for a

single component 41

•Deleting all commands for

	all components	41
•	Programming macro buttons	41
•	Deleting macro buttons	42
• Discrete remote control commands		42

Pressing a source button on the remote con- trol not only selects the input associated with that source...

...but it also remaps the remote control

buttons for that source.

46GFR-700HD Owner’s Manual