Adcom GFR-700HD Other Surround Modes, Tone Control, Stereo, Hall, Manual Bass/Treble Control

Page 58

Chapter 4 - Operations

Other Surround Modes

7.1 m2

Uses an Adcom-proprietary digital pro- cessing technology to expand incoming stereo signals to 7.1-channel surround sound. Use if:

•Your source component is connected to the ana- log or digital audio inputs.

•Your source audio is in 2-channel analog or digi- tal PCM format.

•You have seven speakers plus a subwoofer.

STEREO

Passes an incoming or downmixed stereo signal to the front speakers. Use if:

•Your source component is connected to an ana- log or digital audio input.

•Your source audio is in 2-channel analog or digi- tal PCM format.

•You have at least two speakers (LF/RF), or would simply prefer to listen to a multi-channel source through your two front speakers.

HALL

Creates a hall or amphitheater effect from an incom- ing or downmixed stereo signal. Use if:

•Your source component is connected to an ana- log or digital audio input.

•Your source audio is in 2-channel analog or digi- tal PCM format.

•You have at least two speakers (LF/RF), or would simply prefer to listen to a multi-channel source through your two front speakers.

5-STEREO

Generates maximum output for a ﬁve speaker sys- tem. The rear speakers are driven with the same signal as the front left and right, while the center speaker is a monophonic summation of the front speakers. Use if:

•Your source component is connected to an ana- log or digital audio input.

•Your source audio is in 2-channel analog or digi- tal PCM format.

•You have at at least ﬁve speakers (LF/RF, C, LS/ RS).

Tone Control

Manual Bass/Treble Control

Follow these steps to make Bass/Treble adjustments on the ﬂy:

•Press the Bypass button on the remote control to toggle Tone Control on.

•Use the Bass and Treble buttons to bring up the tone adjustment on-screen display.

•Use the / buttons to set the desired level.

Notes:

•The tone adjustment on-screen display times out after 3 seconds if no button is pressed.

•Tone controls are not available in the Dolby

Digital EX, DTS-ES, NEO6, and Pro Logic IIx Surround modes.

58GFR-700HD Owner’s Manual

Image 58

Contents GFR-700HDA/V Receiver Congratulations on your purchase of the Adcom GFR-700HD Copyrights/TrademarksTable of Contents Important Safety Instructions Regulatory InformationIntroduction Key FeaturesUnpacking the GFR-700HD Placing the GFR-700HD About the Remote ControlInserting the Remote Batteries Front Panel Overview Remote Control Overview Mode button Volume  / buttonsSetup button Preset/Tune buttonRear Panel Overview Zone 2 IR input Voltage switchMain power switch 11 RS232 controlDisplay Overview Surround modeVolume level Video sourceConnections Overview Before You BeginAM/FM Antenna Connections Connecting the AM Loop AntennaConnecting the FM Antenna Antenna InputFor Advanced Connections Connecting Audio/Video ComponentsBasic Audio/Video Connections Video InputDigital Audio Connections DVD Player ConnectionsComponent/Progressive Scan Connections Hdmi ConnectionsComponent/Progressive Scan Connections Special Note on Progressive Scan DVD PlayersDigital Audio Connections Connecting Digital Audio ComponentsCoaxial Optical Digital Audio About Hdmi Connecting Hdmi ComponentsHdmi Connections About the Hdmi ScalerConnecting a DVD-A/SACD Player External Decoder ConnectionsConnecting a Tape Player Connecting a CD PlayerTape Input Video Connections TV/Monitor ConnectionsComposite Video Connections Component Video ConnectionsSpeaker Placement Placing your SpeakersRight Connecting SpeakersSpeaker Connections Left Surround Front CenterConnecting a Subwoofer Connecting an AmpliﬁerConnecting Surround Back Speakers Surround Back Right Back Left Subwoofer OutputConnecting a Video Recorder Output Video 3 VideoTape Out/Aux Connections Connecting a Tape RecorderTape Aux Output Connecting a Remote Sensor Connecting the Zone 2 OutputsConnecting the 12V DC Trigger Variable or Fixed Output?Remote IR Sensor Connections Screen/Power Trigger ConnectionsControl Connections PC ConnectionsConnecting the Power Cable Power ConnectionsChecking the Voltage Switch Turning on the PowerSetup Overview Setup Navigation Input Conﬁguration HD Scaler Conﬁguration Basic Controls Picture ControlsAdvanced Controls Tone Control Volume/Tone ConﬁgurationVolume Bass LevelSpeaker Conﬁguration Delay Conﬁguration Delay UnitFront / R Front Channel BalanceTest Tone Surround / R SurroundNEO6 Music Config Center Image Plii Music Config Center WidthPlii Music Config Dimension Pro Logic IIx/Neo6 ConﬁgurationRoom Advanced SettingsRoom 2 Basic Conﬁguration MuteRoom 2 Advanced Conﬁguration System Conﬁguration Edit Name Input LabelingInput Name Erase NameTape Analog Input LevelVideo 1~4 TunerUsing Preprogrammed Commands Remote Control SetupProgramming Remote Commands Using Preprogrammed Commands Main Commands Video 1-3 CommandsVideo 4 GDV-850 Commands CD GCD-750 Commands Tuner Commands Room 2 Commands Programming Remote Commands Programming a CommandDeleting all Commands for a Component Deleting Remote CommandsDeleting a Command Deleting all Commands for all ComponentsProgramming a Macro Button Programming Macro ButtonsDeleting a Macro button Discrete Remote Control Commands Function Description DataTuner Step + Operations Overview External 7.1 Playback Basic Audio/Video PlaybackPicture Format Tape PlaybackDolby Surround Modes Selecting Surround ModesDTS Surround Modes Stereo Other Surround ModesTone Control HallBasic Recording Making an Audio/Video RecordingTuner Operations Using the Front Panel Display Dimmer Using the Sleep TimerSystem Operations Room 2 Operations Overriding Default Room 2 SettingsActivating the Room 2 Output Customer Support Product Care & MaintenanceSystem Reset Adcom Protection PlanTroubleshooting Symptom Possible Reason Possible SolutionTechnical Speciﬁcations Index Page East Anderson Drive, Suite Scottsdale, Arizona Voice Fax