Discrete Remote Control Commands
The
•9600 baud, 8 data bits, no parity, 1 stop bit, and Flow Control: Hardware.
•All serial port control commands are structured as a four byte packet or string “<SOP>, <cmd>, <data>, <EOP>”.
•SPECIAL RESERVED CHARACTERS: <SOP> Start Of Packet = 0x7B = “{“ (The Left Curly Bracket); <EOP> End Of Packet = 0x7D = “}” (The Right Curly Bracket).
•Example syntax for the Discrete Remote Control Command for ‘Main Volume UP’ expressed as a hexadecimal string: 0x7B, 0x44, 0x2B, 0x7D
Function Description | Data | ASCII |
Main Volume UP | 0x2B | + |
Main Volume DOWN | 0x2D | - |
Main Mute | 0x5B | [ |
Main | 0x5D | ] |
Sleep OFF | 0x1F | US |
Sleep (30) | 0x20 | SPACE |
Sleep (60) | 0x21 | ! |
Sleep (90) | 0x22 | ” |
Sleep (120) | 0x0A | LF |
Sleep (180) | 0x12 | DC2 |
Test tone (noise) On | 0x28 | ( |
Test tone (noise) Off | 0x29 | ) |
VFD (Bright) | 0x5C | \ |
VFD (Dim) | 0x2C | , |
VFD (OFF) | 0x23 | # |
Dynamic Range Normal (100%) | 0x25 | % |
Dynamic Range 75% | 0x40 | @ |
Dynamic Range 50% | 0x3F | ? |
Dynamic Range 25% | 0x2F | / |
Surround Mode select: (steps | 0x30 | 0 |
through available modes) |
|
|
Direct SurMode select: DOLBY | 0x38 | 8 |
DIGITAL |
|
|
Direct SurMode select: DOLBY PRO | 0x31 | 1 |
LOGIC |
|
|
Direct SurMode select: DOLBY PLII- | 0x53 | S |
CINEMA |
|
|
Direct SurMode select: DOLBY PLII- | 0x2E | . |
MUSIC |
|
|
Direct SurMode select: DOLBY PLII- | 0x54 | T |
PANORAMA |
|
|
Direct SurMode select: DOLBY | 0x32 | 2 |
DIGITAL EX |
|
|
Direct SurMode select: DOLBY PLIIx- | 0x0E | SO |
CINEMA |
|
|
Direct SurMode select: DOLBY PLIIx- | 0x0F | SI |
MUSIC |
|
|
Function Description | Data | ASCII |
Direct SurMode select: DOLBY | 0x10 | DLE |
|
| |
Direct SurMode select: DTS | 0x34 | 4 |
Direct SurMode select: DTS NEO:6- | 0x51 | Q |
CINEMA |
|
|
Direct SurMode select: DTS NEO:6- | 0x52 | R |
MUSIC |
|
|
Direct SurMode select: | 0x39 | 9 |
Direct SurMode select: ADCOM | 0x33 | 3 |
7.1m2 STEREO |
|
|
Direct SurMode select: 5 CHANNEL | 0x36 | 6 |
STEREO |
|
|
Direct SurMode select: 2 CHANNEL | 0x37 | 7 |
STEREO |
|
|
Direct SurMode select: HALL | 0x35 | 5 |
OSD Setup Menu (Toggle On/Off) | 0x11 | DC1 |
OSD Navigation Up | 0x5E | ^ |
OSD Navigation Down | 0x5F | _ |
OSD Navigation Select / Enter | 0x3D | = |
OSD Navigation Left | 0x3C | < |
OSD Navigation Right | 0x3E | > |
Front Left Channel Trim + | 0x55 | U |
Front Left Channel Trim - | 0x56 | V |
Front Right Channel Trim + | 0x57 | W |
Front Right Channel Trim - | 0x58 | X |
Surround Left Channel Trim + | 0x41 | A |
Surround Left Channel Trim - | 0x42 | B |
Surround Right Channel Trim + | 0x43 | C |
Surround Right Channel Trim - | 0x44 | D |
Surround Back Left Channel Trim + | 0x45 | E |
Surround Back Left Channel Trim - | 0x46 | F |
Surround Back Right Channel Trim + | 0x47 | G |
Surround Back Right Channel Trim - | 0x48 | H |
Center Channel Trim + | 0x49 | I |
Center Channel Trim - | 0x4A | J |
Subwoofer Channel Trim + | 0x4B | K |
Chapter 3 - Setup
www.adcom.com | 53 |