Eddie Bauer 3-In-1, Luxe manual Removal of Seat Base, Removal of Harness, Pull harness out of shell

Page 22

4358-3340D Elite_Lux 3/13/06 3:08 PM Page 43

Removal of Seat Base

Base must be removed for use as Belt-Positioning Booster.

Removal of Harness

Harness must be removed for use as a Belt-Positioning Booster.

Belt-Positioning

1

 

B

A

 

Move seat to fully reclined position. Push down on tab on right side of base (A).

From the other side, push on bar (B) and pull the bar completely out.

1

From the back of the seat, unfasten harness straps from splitter plate.

Booster Use: 40-100 lbs. (18.1-

A

2

Store splitter plate by pushing it through one opening and out the other.

45.4 kg), 43-52” (110.1-132.1

2

Pull on recline lever and lift shell off base. Store bar in base for future use.

3

Pull harness through the slots from the front.

Unthread harness from the harness retainer.

Unthread harness from the buckle plates.

Pull harness out of shell.

cm), Over 1 year of age.

40

41continued on next page.

Page 21 Page 23
Image 22
Page 21 Page 23
Contents
Alpha Omega Elite/Luxe Deluxe 3-In-1 Table of Contents Before You BeginNever place a child less than one-year old forward facing Registration and Recall Information Aircraft InstallationGeneral and Warm Weather Use Dorel Juvenile Group, Inc PO Box 2609, Columbus,Anchor Bracket Seat Buckles Air Bag Seat Bight Where seat cushions meetUnderstanding Your Vehicle Latch AnchorsHeadrest Harness Release Infant Insert Child Restraint PartsHeadrest/Harness F Top Anchorage Tether Strap & HookLbs 2.3-16 kg -91 cm Choosing Restraint and PositionPreparing Child Restraint to Fit Your Child Make sure Latch beltForward-Facing Position Check Harness/Headrest HeightRear-Facing Position Harness Covers on select models Harness coversSnap the harness retainer together Position the harness Pull on harness adjustment strap to tighten harness snuglySecuring Your Child in the Child Restraint Child’s neckRotating Armrests Knowing Your Vehicle Belts Choosing Latch or Vehicle BeltsAutomatic/Passive vehicle seat belts Vehicle belt too short Locking Clip Manual BeltsRear-Facing Use Rear-Facing Installation Rear-Facing Installation with Vehicle BeltRear-Facing Installation with Latch Install Latch Belt Shown installedRear-Facing Installation with Latch Install in Vehicle Forward-Facing Use Forward-Facing Installation Forward-Facing Installation with Vehicle BeltsRestraint as described Your child in the childOver 1 year of age Locations and more Fasten one Latch beltFor other side of child InformationBelt-Positioning Booster Use Adjusting the Top Anchorage StrapTo Adjust Top Anchorage StrapRemoval of Harness Removal of Seat BasePull harness out of shell Lock latch plates into Belt-Positioning Booster InstallationFree from shell and pad Buckle for future useChilds neck Reinstall Harness and BaseThrough one Shoulder belt toRemove Seat Pad for Cleaning Reinstall BaseOff the shell. Slip off Trouble ShootingOff of headrest Armrest padsWarranty Limitation of DamagesReplacement Parts Order Form Fax orders to
Related manuals
Manual 28 pages 62.48 Kb