| Assembly |
| |
8 |
| 10 | PRESS HERE |
Cowling | To Snap Side Tabs | ||
Side | Side |
|
|
Tab |
|
| |
Tab |
|
| |
|
|
| |
Shifter | Rear Tab |
|
|
Handle |
|
|
|
| Channel |
|
|
|
| • Press firmly on each side of the cowling to snap the | |
|
| four side tabs into the slots in the vehicle body. Make | |
|
| sure the rear tab stays aligned with the slots. | |
• Press the tab under the back of the seat and lift to | Note: You may need to flex the shifter to the side to fit the | |
remove the seat. | ||
cowling over the high speed | ||
|
•Fit the rectangular opening in the cowling over the shifter handle.
•Align the front, side and rear tabs on the cowling with the slots in the vehicle body but do not snap the tabs into the slots.
•Make sure the harness wires are positioned in the channel to prevent them from being pinched between the cowling and vehicle body.
9 | PRESS HERE |
To Snap Front Tabs |
11 |
|
|
|
|
| PRESS HERE | ||||||||||
|
| To Snap Rear Tabs | ||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
•Press firmly on the back of the cowling to snap the rear tab into the slots in the vehicle body
•Press firmly on the front of the cowling to snap the four front tabs into the slots in the vehicle body. Make sure the side and rear tabs stay aligned with the slots.
Note: Pull up on the front of the vehicle body while pressing down on the cowling to make sure the front tabs snap into the slots.
11