|
| Assembly |
| |
16 | Handlebar | Sound | 18 | Handlebar |
| Box | Housing - | ||
| Top Half | |||
|
| Neck |
|
|
Groove |
| Rib |
|
|
|
|
|
| |
Steering | Handlebar |
|
| |
Column | Housing - |
|
| |
|
| Bottom Half |
|
|
• Slide the bottom half of the handlebar housing onto the |
|
| ||
end of the steering column. Make sure the rim on the |
|
| ||
bottom of the handlebar housing fits into the hole in the |
|
| ||
vehicle body. |
|
| • Fit the top half of the handlebar housing onto the bottom | |
• Slide the handlebar, neck side down, onto the end of the | half of the handlebar housing. |
| ||
steering column. Make sure the handlebar arms fit into | • Insert three #8 x 3/4" screws through the holes in the top | |||
the grooves in the handlebar housing and that the | half of the handlebar housing and tighten the screws with | |||
soundbox fits over the rib. |
| a Phillips screwdriver. Do not |
| |
17 | Cap Nut |
Washer | |
| Steering |
| Column |
| Handlebar |
Handlebar | Housing - |
Bottom Half |
Helpful Hint: You may want the help of another adult to support the steering column near the steering linkage while assembling the handlebar to the vehicle body.
•Push firmly on the handlebar to make sure that the bottom half of the handlebar housing and the handlebar are fully seated on the vehicle body.
•Slide a washer onto the steering column.
•Fit a cap nut on the end of the steering column.
•Tap the cap nut with a hammer to secure it on the end of the steering column.
• Pull up on the handlebar to make sure the assembly | 13 |
is secure. |