Battery Installation

Important Note: Use only a Power Wheels® 12 volt battery with built-in thermal fuse. Use of any other battery will damage your vehicle. Make sure that you charge the battery for at least 18 hours using the enclosed Power Wheels® 12 volt charger before operating your vehicle for the first time. Charge the battery for at least 14 hours after each use of the vehicle. Never charge the battery longer than 30 hours. Failure to follow these instructions may damage your battery and will void your warranty.

Seat

Vehicle
Body	Tab

•Press the tab under the back of the seat and lift to remove the seat.

	2
	Slot	Slot
	Battery	Arms
	Retainer	Arms
	Retainer

•Squeeze the battery retainer arms together to release the arms from the slots in the vehicle body.

•Press the battery retainer arms in and over the lock

tabs and lift the battery retainer.	17

Battery

Motor

Harness

Connector

•Place the battery upright in the battery compartment.

•Plug the motor harness connector into the battery. Push firmly to join.

4
Slot	Slot
	Arm
	Arm

• Lower the battery retainer over the batteries.

•Fit the battery retainer arms down into the slots in the vehicle body.

•Press the battery arms out over the lock tabs to snap and secure the battery retainer arms in the slots.

•Re-assemble the vehicle seat.

Battery Installation

tabs and lift the battery retainer.