Toshiba Parallel Port Flash Card Reader user manual Getting Started

Page 5

Getting Started

Before you install your CameraConnect Pro, familiarize yourself with the location and appearance of your computer system’s printer port connector and keyboard connector. Determine if you have a “PS/2” keyboard or an “AT” keyboard. The best resource for this information is your computer system user’s manual.

If you can’t find your computer user’s manual, go to “Appendix B: Technical Refer- ence” at the back of this manual for help. In that appendix are drawings of these connectors that might help you to identify the correct components. The location of these ports change from system to system, however, so study the layout of your computer’s I/O ports carefully to avoid plugging a cable into the wrong connector.

Connecting the CameraConnect Pro Hardware

Turn off the power and unplug the power cord. Although you will not be opening your computer’s cover, this step is necessary to prevent damage to your computer system’s motherboard from insertion or removal of connectors with the power on.

Step 1 If your computer is on, shut it down, turn off the power, and unplug the power cord.

Step 2 Find the keyboard adapter included in the CameraConnect Pro package. This device allows you to use the CameraConnect Pro in a system with either an AT or PS/2 keyboard. The following drawing illustrates this de- vice.

Figure 1: Keyboard Adapter

Step 3 Find the port where your keyboard is connected to your computer. Make a note of the location of this port, then unplug the keyboard cable. If you have an AT keyboard, see Figure 2. If you have a PS/2 keyboard, see Figure

3.In both cases the connection of the CameraConnect Pro to the printer port is the same.

5

Image 5
Contents Parallel Port Flash Card Reader Table of Contents Contacting Actiontec Customer Support IntroductionFeatures Getting Started Connecting the CameraConnect Pro HardwareAT Keyboard Assembly Diagram Windows 95 or Installing the Driver and Utility SoftwarePage Page Windows NT Page Click OK. Follow the on-screen instructions Inserting Devices into the CameraConnect Pro Using the CameraConnect ProFront Panel Functions Inserting a Pcmcia ATA Flash Card Formatting a Card or Smart Media Ssfdc Device Inserting an Smart Media Ssfdc DevicePage Page Printers Viewing, Writing, and Copying FilesOther External Devices CameraConnect Utility Screen Using The CameraConnect Pro UtilityPage Some Common Error Messages Error Messages and TroubleshootingSome Common Problems CameraConnect Pro will not install. No Drive Letter Assigned Page Uninstalling in Windows 95 or Windows Appendix a Uninstalling the CameraConnect ProWindows NT Appendix B Technical Reference External Port ConnectorsDeclaration of Conformity Page Page