En
GETTING STARTED / TAKING A PICTURE
SETTING THE CAMERA’S OPERATIONAL MODE
The camera has 3 operational modes: Camera Mode, Review Mode and Video Clip Mode.
To change the camera operational mode, slide the mode switch horizontally to the corresponding position.
Camera Mode |
Use the camera mode to take pictures or to customize your camera settings for picture taking.
Review Mode
Use the review mode to browse through images and video clips, to delete images and video clips, to play a slide show, or to transfer the images/video clips from the internal memory to the SD card.
Video Clip Mode
Use video clip mode to capture video clips with sound or to customize your camera settings for video clip recording.
TAKING PICTURES
TAKING PICTURES WITH THE VIEWFINDER
| A | 4 | 28/45 |
fig.1.1 |
| fig.1.2 | |
A | 4 | 28/45 |
fig.1.3 |
| |
1.Turn the camera on.
2.Set the camera to ( 
) Camera mode.
The LCD can be switched off to save battery power by pressing the ( 
) button.
3.Frame the subject in the viewfinder. (fig.1.1)
4.Press the shutter button
• The camera will automatically determine the best focus, and a rapid click sound can be heard.
Note: For more information on Focus Lock, please go to page 11. To change AF mode, please refer to p. 24.
5.Press the shutter button fully to capture the image. (fig.1.3)
•The camera will make a click sound.
•The camera will beep when the image is captured.
•When the image has been captured, the Flash Ready LED next to the viewfinder will blink to indicate that the image is being stored.
9