RESTORE THE CAMERA TO FACTORY DEFAULT SETTINGS
RESTORE THE CAMERA TO FACTORY DEFAULT SETTINGS
To restore the default settings in your camera:
1.Press when Restore Default is highlighted in the camera.
2.Press or to highlight No or Yes, and then press OK.
•When No is selected, no change is made. The LCD returns to the previous screen.
•When Yes is selected, the LCD shows “Are you sure?”
3.Press or to highlight Yes or No, and then press OK.
•If No is selected, no change will be made. The LCD returns Setup page.
•If Yes is selected, the camera will be reset to the factory default setting. The LCD will show “Restoring...” for a few seconds and then return to setup page. The Default settings will be restored.
Note: Please refer to the table below for the default settings.
OPTION | DEFAULT STATUS |
Camera Mode | Single Shot |
|
|
Image Size | 2272 x 1704 |
Quality | Normal |
Flash | Auto Flash |
|
|
White Balance | Auto |
LCD Brightness | Center (0) |
Scene Selection | OFF |
Digital Zoom | Yes |
Exposure Compensation | 0 |
ISO | Auto |
Metering | Matrix |
Photo Effect | None |
Time Out | 2 min |
Slide show interval | 2 Seconds |
Beep | ON |
Quick View | 1 Sec |
AF Mode | |
Continuous Repeat | No |
AF Assist Light | Auto |
TV Mode | NTSC for USA/Japan, PAL for Europe/Asia |
Date/Time Format | USA/Japan: MM/DD/YYYY, |
| Europe/Asia: DD/MM/YYYY, |
|
|
En
44