TAKING PHOTOS
1.Set the camera to Camera Mode by moving the Mode Switch to 
.
2.Position the subject in the viewfinder OR the LCD.
3.Gently press the Shutter button (fig.1.4) and keep the camera still until the camera ready LED next to the viewfinder flashes. (fig.1.5)
4.When the image has been captured, the camera ready LED next to the viewfinder begins to blink. This indicates that the image is being processed.
5.A preview of the image will be displayed on the LCD for 2 seconds after it is captured and the file counter number displayed in the LCD will be updated.
fig.1.4 |
fig.1.5 |
TAKING VIDEO CLIPS
MAIN MENU |
M o d e |
Q u a l i t y |
F l a s h |
W B |
FLASH |
| |
A u t o |
| |
F l a s h | OK | |
Flash Off | ||
| ||
Main Menu |
|
PRESS SHUTTER TO STOP |
1.When Video Clip is highlighted in the MODE menu and press 
.
2.Press the Shutter button to begin recording a continuous video clip.
3.Press the Shutter button again to stop recording.
4.The camera will continue recording until the memory is full.
OR
5. When the recording is completed, the camera will return to Camera Mode.
Note: If you would like to cancel your video clip session before pressing the Shutter button, press MENU to exit.
USING THE MMC
In addition to internal memory, the camera features an external memory port that uses a removable MultiMediaCard (MMC) that allows you to store additional images. When the MMC is inserted, the camera uses it as its default memory. The stored images and video clips in the internal memory will be transferred automatically to the MMC, and all photos taken from that point will be stored on it. When the MMC is removed from the camera, the images will remain stored on the MMC until deleted.
3