Inserting the memory card:
1.Locate the battery door on the bottom of the camera.
2.Slide the button on the battery door toward the center of the camera.
3.Lift the battery door to open.
4.Insert the MMC in the direction specified on the card. (fig.1.6)
5.Close the battery door.
fig.1.6 |
NOTE: If an MMC with insufficient memory is inserted, there will only be a partial transfer and the MMC will be filled. Please insert an MMC with sufficient memory.
DELETE ONE FILE:
To delete a single file from the | MAIN MENU | DELETE | DELETE ONE | |
Delete | Delete One | THIS FILE? | ||
internal memory: | Thumbnail | Delete All | No | |
1. | Slide the mode switch | Brightness | Main Menu | Yes |
| towards . | Exit |
|
|
2. | Press MENU. |
|
|
|
3.When Delete is highlighted in the MAIN MENU, press .
4.When Delete One is highlighted in the DELETE menu, press .
5.The next screen will read "Delete This File?" Press or to highlight No or Yes and press OK to select.
6.If Yes is selected, the file will be deleted.
7.If No is selected, no change will be made.
SOFTWARE INSTALLATION
NOTE: Do not connect the camera to your computer before the camera drivers and software installation is completed.
Installing the Camera Drivers and ArcSoft Applications:
1.Insert the
2.The installation screen appears on the computer’s monitor. Follow the software installation instructions on your screen to install the software.
3.When the
4.Follow the
NOTE: If your computer has the
SPECIAL FEATURES
PC Video Clips (Window only)
The Concord
4