1.Follow the steps from the Connecting the camera to the computer section in the User’s Guide.
2.Launch the ArcSoft VideoImpression software by clicking on
3.Click on the NEW icon.
4.Click on the CAPTURE icon.
Recording Video Clips:
1.Follow steps
2.Click on the RECORD icon. To stop recording, press the ESC button on your keyboard or click the
PAUSE icon on your screen.
To save your video, simply click on the SAVE icon and follow the
Web Camera (Window only)
You may also use the Concord
Using the camera as a Web Camera:
1.Follow the steps from the Connecting the camera to the computer section in the User’s Guide.
2.Launch Microsoft NetMeeting software.
3.After NetMeeting is launched, go to
4.Select the Concord Duo LCD driver under the Video Properties section and then click OK.
5.To start the video, click on the start video icon.
6.Follow the NetMeeting
NOTE: If you do not have NetMeeting already installed on your computer, please visit www.microsoft.com for instructions on how to obtain a copy.
Interchangeable Face Plates
The Concord
Changing the face plate:
1.Open the Cable Connection panel by sliding the door in the downward direction and then lifting it until it is open as displayed in fig.1.7.
2.Push down on the Press tab and gently lift the face plate to remove. (fig.1.7)
3.Insert the face plate by aligning its tabs with the grooves on the camera as indicated in the illustration and snapping it into place. (fig.1.8)
fig.1.7 |
fig.1.8 |
Concord, Concord
5