Audio settings Gaudio SET, Muting type Mute TYP

SET MENU

■Audio settings G)AUDIO SET

Use to customize this units overall audio settings.

Muting type MUTE TYP.

Use to adjust how much the mute function reduces the output volume.

Choices: FULL, –20dB

•Select FULL to completely halt all output of sound.

•Select –20dB to reduce the current volume by 20 dB.

Audio delay A. DELAY

Use to delay the sound output and synchronize it with the video image. This may be necessary when using certain LCD monitors or projectors.

Choices: 0 to 160 ms

Tone bypass TC.BYPASS

Use to select whether audio output bypasses tone control circuitry when TREBLE and BASS (page 26) are set to 0 dB.

Choices: AUTO, OFF

•Select AUTO if you want signals to bypass tone control circuitry to provide the purest signal possible.

•Select OFF if you do not want signals to bypass tone control circuitry.

2 INPUT MENU

Use to reassign digital input/outputs and select the input mode.

■Input/output assignment I/O ASSIGN

You can assign jacks according to the component to be used if this unit’s initial settings do not correspond to your needs. Change the following parameters to reassign the respective jacks and effectively connect more components. Once the inputs have been reassigned, you can select the corresponding component by using INPUT on the front panel or the input selector buttons on the remote control.

For COMPONENT VIDEO jacks A (C.V[A]) and

B(C.V[B])

Choices: [A] DVD, DTV/CBL, V-AUX, VCR [B] DVD, DTV/CBL, V-AUX, VCR

For OPTICAL OUTPUT jack 1 (OUT(1)) Choices: MD/CD-R, CD, V-AUX, DTV/CBL, VCR,

DVD

For OPTICAL INPUT jacks 2 (IN (2)), 3 (IN (3)) and 4 (IN (4))

Choices: (2) CD, MD/CD-R, DVD, DTV/CBL, V-AUX,

VCR

(3)CD, MD/CD-R, DVD, DTV/CBL, V-AUX,

VCR

(4)CD, MD/CD-R, DVD, DTV/CBL, V-AUX,

VCR

For COAXIAL INPUT jack 5 (IN (5))

Choices: CD, MD/CD-R, DVD, DTV/CBL, V-AUX,

VCR

Notes

•You cannot select a specific item more than once for the same type of jack.

•When you connect a component to both the COAXIAL and OPTICAL jacks, priority is given to the input signals from the COAXIAL jack.

■Input mode B)INPUT MODE

Use this feature to designate the input mode for sources connected to the DIGITAL INPUT jacks when you turn on this unit (see page 32 for details about the input mode). Choices: AUTO, LAST

•Select AUTO to allow this unit to automatically detect the type of input signal and select the appropriate input mode.

•Select LAST to set this unit to automatically select the last input mode used for that source.

Note

Even if LAST is selected, the last setting for the EXTD SUR. button will not be recalled.