ADVANCED SETUP MENU
■ADVANCED SETUP menu items
Change the initial settings (indicated in bold under each parameter) to reflect the needs of your listening environment.
Speaker impedance SP IMP.
Use to switch the speaker impedance for this unit. Choices: 8 ! MIN∃%4 !%MIN
•Select 8 !%MIN%to set the speaker impedance to 8 !%.
•Select 4 !%MIN to set the speaker impedance to 4 !%.
SP IMP. | Speaker | Impedance level |
|
| If you use one set (A or B), |
|
| the impedance of each |
|
| speaker must be 4 ! or |
| Front | higher. |
|
| |
| If you use two sets (A and | |
|
| |
4 !%&∍( |
| B), the impedance of each |
| speaker must be 8 ! or | |
|
| |
|
| higher. |
|
|
|
| Center | The impedance of each |
|
| |
| Surround | speaker must be 6 ! or |
|
| higher. |
| Surround back | |
|
| |
|
| If you use one set (A or B), |
|
| the impedance of each |
|
| speaker must be 8 ! or |
| Front | higher. |
|
| |
| If you use two sets (A and | |
|
| |
8 !%&∍( |
| B), the impedance of each |
| speaker must be 16 ! or | |
|
| |
|
| higher. |
|
|
|
| Center | The impedance of each |
|
| |
| Surround | speaker must be 8 ! or |
|
| higher. |
| Surround back | |
|
|
Factory presets PRESET
Use to reset all parameters to the factory presets (see page 72).
Choices: CANCEL, RESET
•Select CANCEL if you do not want this unit’s parameters to be initialized when you reset the factory presets.
•Select RESET if you want all of this unit’s parameters to be initialized when you reset the factory presets.
Note
This setting does not affect ADVANCED SETUP menu item parameters.
Remote REMOTE
Use to switch the ID for the remote control of this unit. Choices: ID1, ID2
•Select ID1 to operate this unit using the default code.
•Select ID2 to operate this unit using an alternative code.
Note
You must also make settings for the remote control (see page 60).
56