Please note, the PIR is strongly sensitive to ambient temperature. The greater the temperature difference between the environment and your subject, the farther the possible sensing distance. The average sensing distance is about 45 ft.
Before leaving the camera unattended, please check for the following:
•Are the batteries or DC power supply inserted/connected with correct polarity and is the power level is sufficient?
•Does the SD card have sufficient available space and is its write- protection (lock) switch off?
•Is the Power switch in the ON position? (do not leave it in SETUP).
PLAYING BACK/DELETING THE PHOTOS/VIDEOS
After you have setup, mounted and activated your Trophy Cam, you will of course be eager to return later and review the images it has captured for you. There are several different ways this can be done.
Reviewing Images on the Trophy Cam LCD (Models with Color Viewer only)
•Put the power switch in SETUP mode (switch to OFF first).
•Push the OK(Replay) key to enter image review mode.
•Use the UP/DOWN keys to scroll through your photos or videos. The right corner of the display will indicate “JPG” for still photos, and a film icon for video files. Press the RIGHT(Shot) key to review a video.
•Push MENU to delete an image. Image delete mode works as described below. To exit image review mode, press the OK key.
Reviewing Images on an External Video Monitor
A TV monitor can also be used to play back pictures (or videos) from the device. Connect a TV monitor or a viewing device (such as a digital picture frame) that has a standard composite video input (RCA jack) to the Trophy Cam ‘s “TV Out” mini jack using the supplied cable. Then:
•Put the power switch in SETUP mode (switch to OFF first).
•Press the OK key. The most recently captured image will be shown
21