Bushnell 98-1559 / 1-10 instruction manual Inserting the SD Card

Page 8

cable (not provided) to connect the external DC power source with the power input jack of the Trophy Cam, making sure that the polarity is correct. Note: The power connector is a 4.0x1.7mm coaxial DC power plug with positive “tip” (inside pin) polarity (Radio Shack P/N 274-1532 or equivalent).

If both an external power source is connected and batteries are installed, the Trophy Cam will be powered by the external power source.

When the batteries become weak, the low-battery indicator LED will glow blue, indicating the batteries should be changed (pg 6, “Front View”).

Inserting the SD Card

The Trophy Cams have 32MB internal memory, which can hold only about 20 photos (@ 5MP resolution). This is handy for testing and getting familiar with the camera, but you will no doubt want to leave the camera unattended for longer than a day, so using an SD card is recommended. Insert the SD card (with the camera’s power switch in the OFF position) before beginning to operate the camera. Don’t insert or remove the SD card when the power switch is in the ON position.

The Trophy Cam uses a standard SD (Secure Digital) memory card to save photos (in .jpg format) and/or videos (in .asf format). SD and SDHC (High Capacity) cards up to a maximum 16GB capacity are supported. Before inserting the SD card into the card slot after opening the camera’s front cover, please make sure that the write-protect

switch on the side of the card is “off” (NOT in the “Lock” position). The following describes how to insert and remove the SD card:

•Insert the SD card into the card slot with its label side upwards (see above). A “click” sound

indicates that the card is installed successfully. If the wrong side of the card is facing up, you will not be able to insert it without force-there is only one correct way to insert cards. If the SD card is not installed correctly, the device will not display an SD card icon on the LCD in SETUP mode (the SD card icon displayed after switching to SETUP mode will have a “lock” symbol inside it in it if the card is locked). Formatting the SD card by using the Trophy Cam’s “Format” parameter before using it for the first time is recommended, especially when a card has been used in other devices

8

Image 8

Contents Trophy CAM S T R U C T I O N M a N U a LPage Table of Contents Important Note Introduction Parts and ControlsAbout the Trophy Cam ApplicationsSetup OFF Loading Batteries Installing the Batteries and SD CardUsing an External Power Source optional, user provided Inserting the SD Card Using the Trophy CAM OFF, ON, and Setup ModesOFF Mode See Changing Menu Parameter Settings for detailsOn Mode Setup ModeSetup Mode Shortcut Keys/Functions Setup Information Screen standard display model shownChanging Parameter Settings in Setup Mode Color Viewer vs. Standard Display ModelsColor Viewer EXAMPLES-Changing the Settings of Some Common Parameters Setup Menu Parameters and Settings List w/Descriptions Parameter Settings DescriptionSelected. Note after setting down 60M-1M are setModels, press Menu or select Hr format only, 00=midnightDefault Set Mounting and Positioning the Trophy CAM MountingSwitching on the Camera Sensing Angle and Distance TestPlaying BACK/DELETING the PHOTOS/VIDEOS Reviewing Images on an External Video MonitorDeleting Photos or Videos Reviewing Images Directly From the SD CardReviewing Images by Connecting the Camera to a Computer Downloading the PHOTOS/VIDEOS Camera stops taking images or won’t take images Troubleshooting / FAQBattery life is shorter than expected Camera won’t power up Still Photo and/or Video Quality ProblemsNight photos or videos appear too dark Daytime photos or videos appear too darkDate/Time Stamp not appearing on images Photos Do Not Capture Subject of InterestLCD Screen Issues Camera won’t retain settingsLCD screen powers on but no text is present Screen comes on but then powers offTechnical Specifications TWO-YEAR Limited Warranty FCC Compliance Statement Français Remarques Importantes Présentation DU Trophy CAM Propos du Trophy CamVUE DE Face Installation DES Piles ET DE LA Carte SD Mise en place des pilesInsertion de la carte SD Avertissement Utilisation DU Trophy CAM LES Modes MARCHE, Arrêt ET ConfigurationMode Arrêt OFF Mode Marche on Mode Configuration SetupTouches Raccourcis en mode Configuration Setup Page Page Affichage en couleur Affichage standard Page Paramètre Réglages Description 60 mn-1 mn Sont réglésPar incréments ’une minuteExecute ValiderSuivi d’une Étape No/YesImpression Montage ET Positionnement DU Trophy CAM MontageAngle de détection et test de distance Allumer l’appareilLIRE/EFFACER LES PHOTOS/VIDÉOS Visionner les photos/vidéos sur un moniteur vidéo externe Effacer des photos ou des vidéosVisionnage direct sur la carte SD Visionnage sur un ordinateurTéléchargement des PHOTOS/VIDÉOS Page La durée de vie des piles est plus courte que prévue ’appareil arrête de prendre des photos ou n’en prend pasLes photos ou vidéos prises de nuit semblent trop sombres ’appareil ne s’allume pasProblèmes de qualité des photos et/ou vidéos Couleur dominante rouge, vert ou bleu Les photos ou vidéos prises de nuit semblent trop clairesLes photos sont striées ’impression date/heure n’apparaît pas sur les photos Problèmes d’écran LCD ’appareil ne garde pas les réglages en mémoire’écran LCD s’allume mais il n’y a pas de texte ’écran s’allume mais s’éteint aussitôtCaractéristiques Techniques Garantie Limitée DE Deux ANS AllemagneDéclaration de conformité FCC