Before leaving the camera unattended, please check for the following:
•Are the batteries or DC power supply inserted/connected with correct polarity and is the power level is sufficient?
•Does the SD card have sufficient available space and is its write- protection (lock) switch off?
•Is the Power switch in the ON position? (do not leave it in SETUP).
PLAYING BACK/DELETING THE PHOTOS/ VIDEOS
After you have setup, mounted and activated your Trophy Cam, you will of course be eager to return later and review the images it has captured for you. There are several different ways this can be done.
Reviewing Images Directly From the SD Card
This is the most popular method of viewing images. Since unmounting the camera and taking it to your computer isn’t very convenient, you may find it easier to just take the card out. By removing the SD card (swapping it for a new empty card if you like) and taking it to your home or campsite to view the images by using an SD card “reader” (user supplied) connected to your computer (some computers and TVs have a built in SD card slot), you can leave the camera in place ready to capture more images. Once connected, the card reader works the same way as described
Reviewing Images on the Trophy Cam Color LCD (Model #119477 only)
•Put the power switch in SETUP mode (switch to OFF first).
•Push the OK (Replay) key to enter image review mode.
•If you are in still photo mode, you’ll see the still photo review screen. If you are in video mode, you’ll see the video review screen.
•Use the UP/DOWN keys to scroll through your photos or videos. A zoom feature is available for still photos: first press the LEFT key, then use the UP/DOWN keys to zoom in or out. After zooming in, you can then press OK, and use the UP/DOWN/ LEFT/RIGHT keys to move around and examine small details in different areas of the photo. Press OK at anytime to exit and return to the full view.
•Press the RIGHT (Shot) key to play a video. If “Video Sound” was set
29