Parameter | Settings | Description | |
| (Bold=default) |
| |
|
|
| |
Video | 10S (second) | Sets length per captured video | |
Length (only | default, with | clip. Settings begin with 10 | |
affects video | 60S to5S | second default when parameter is | |
clips) | possible range | first selected. After stepping down | |
to 5S, video length settings start | |||
|
| ||
|
| over at 60S. | |
|
|
| |
Interval | 10S (second) | Selects the length of time that the | |
| default, | camera will “wait” until it responds | |
| with a 60M | to any additional triggers from the | |
| (minute) to1S | PIR after an animal is first detected | |
| and remains within the sensor’s | ||
| (second) range | ||
| range. During this user set “ignore | ||
| of settings | ||
| triggers” interval, the camera will | ||
| available. | ||
| not capture photos/videos. This | ||
| prevents the card from filling up | ||
| with too many redundant images. | ||
| are set in | Settings begin with 10 second | |
| one minute | default when parameter is first | |
| increments, | selected. Note: after setting down | |
| past “1S”, settings start over at “60M”. | ||
| |||
|
| ||
| in one second |
| |
| increments) |
| |
|
|
|
21