Camera Handpiece Portability

INSTALLATION

2.Connection without gameport made via optional external A5125 gameport to USB adapter cable -

a.Connect USB connector end of the A5125 adapter to the USB port on the rear of the PC.

b.Set the red DIP switch on DB-15 connector of the A5125 USB adapter to the Joystick A

(option 2) position.

c.Turn on Computer and observe that the A5125 USB adapter is recognized.

d.Connect 8-Pin Mini DIN connector end of the PC Game Port Control cable to the PC connector on the rear of the Control Module.

e.Connect the DB-15 connector end of the PC Game Port Control cable to the A5125 gameport to USB adapter DB-15 connector. Tighten connector securing screws.

Connection without Gameport

REAR OF PC

USB

Port

8-Pin Mini DIN

Connector

Optional
USB
Adapter	Supplied PC Game
Cable	Port Control Cable

DO NOT TWIST OR TURN THE HANDPIECE CABLE CONNECTOR. THE CONNECTOR

IS KEYED AND MATES STRAIGHT ON WITH CAMERA HANDPIECE CONNECTOR.

The Acclaim Camera Handpiece quickly detaches from the Handpiece Cable and is easily carried among patient operatories for use with additional Acclaim Camera System Control Modules. Refer to the corresponding illustrations and transport the Camera Handpiece as follows:

1.Retract collar of quick disconnect Handpiece Cable connector and simultaneously pull straight from the Handpiece connector.

2.Release connector quick disconnect collar.

3.Store the Handpiece Cable by placing cable slide holder into the Handpiece Holder.

4.Transport Handpiece to next operatory.

5.Connect Handpiece at new location by aligning the connector key with the keyway of the mating Handpiece Cable connector.

6.Insert straight into Handpiece connector until it securely snaps into place.

Detaching Camera Handpiece
Quick Disconnect Collar	Camera Handpiece

Camera Handpiece Connection

Connector Key

Camera Handpiece

Stored Handpiece Cable

Quick Disconnect Connector End

Handpiece Holder

Cable Slide Holder

Handpiece

Cable