PRE-INSTALLATION Information

COMPONENT DESCRIPTION

Camera Handpiece Holder with Double-Sided Adhesive Fastener - The Camera Handpiece Holder, part number A5145, can be fastened in a convenient location for safe storage of the Camera Handpiece when it is not in use. In addition to storage, the Camera Handpiece Holder also has built-in magnets that turn off the Camera Handpiece power. This feature conserves energy and equipment wear so the camera is ready and operational when needed.

Camera Handpiece Cable - This 15-foot multi-conductor cable with quick-disconnect connectors at each end (part number A5105) interconnects between the Camera Handpiece and the Control Module providing all power, video output and control for camera operation. Optional 6, 9, 30 and 50-foot length cables are available from your Air Techniques Dealer.

Gameport Control Cable - A 10-foot cable, part number A5115, that interconnects between the Control Module and the gameport of the user’s PC. Allows the 2 keypad buttons on the camera to be used instead of a gameport-connected footswitch to freeze/unfreeze and save images on a PC with a user-supplied compatible streaming video capture software application. An optional 20-foot cable is available from your Air Techniques Dealer.

Gameport to USB Adapter Cable - An optional external gameport to USB adapter cable, part number A5125, is purchased separately to allow the PC Game Port Control cable to connect to the USB Port of the user’s computer when no gameport is available.

USB 2.0 High Speed Cable - A 6-foot USB 2.0 cable, part number B3554 that connects between the Control Module and the user’s computer. Provides a digital video output for use with a PC with user-supplied compatible streaming video capture software application.

Composite Video Cable - A 6-foot composite video cable (part number 77389) is used to connect between the Control Module and external video monitor or computer with video capture card for direct viewing.

IMPORTANT: When operating the Acclaim Camera System connected to the USB port on a Computer System, the computer must be loaded with Air Techniques Authorized DirectX 9 compliant streaming video software application.

Neither the Computer System nor the Software is provided by Air Techniques. The Computer System and Software is provided by third party dealers.

Minimum Computer System Requirements - The Computer System (CPU, monitor, etc.) and any related peripheral or other equipment, supplied by the user, or a third party, must comply with the requirements for “Information Technology Equipment" (ITE) as specified in IEC 60950 (EN 60950).

Unless otherwise stated, the components of the computer system must comply with the minimum requirements listed below.

CPU Speed:	Pentium-4, 2 GHz or higher
Operating System:	Windows 2000 Service Pack 4 or Windows XP Service Pack 1
	with Microsoft knowledge base KB822603 update
	DirectX 9 compliant streaming video software application installed
System RAM:	256 MB
CD ROM Drive:	24X or higher
Monitor :	SVGA 17" with 800 x 600 resolution or higher
Video Display Adapter:	16 MB video card with 800 x 600 pixel resolution and 32-bit color
USB Port:	Must be USB 2.0 high speed port