Acclaim Lighting A5000 manual Handpiece Keypad Button Functions, Handpiece Connector

HANDPIECE KEYPAD BUTTON FUNCTIONS

2

Acclaim Camera

Handpiece

1

A5020

3

Keypad Buttons - Each keypad button provides the Acclaim Camera Handpiece fingertip control over the PC streaming video capture software via the gameport cable. The specific functions performed by the keypad buttons depend on system hardware and software installation configurations that support a 2-button footswitch. Typical keypad actions provided below.

NOTE: Simultaneously depressing both keypad buttons for approximately 3 seconds deactivates the Camera Handpiece LED light source. This is commonly used when imaging an X-ray on a light box.

(1)	Top Keypad Button	Sends a gameport footswitch button 1 command to the PC via the
		gameport control cable. While the specific function performed
		depends on the setting of the video capture software application
		installed on the PC, this command typically freezes and unfreezes the
		image that is displayed on the computer monitor.
(2)	Bottom Keypad Button	Sends a gameport footswitch Button 2 command to the PC via the
		gameport control cable. While the specific action depends on the
		video capture software installed, it typically saves the image displayed
		on the computer monitor to the computer hard disk.
(3)	Handpiece Connector	An 8-pin connector socket that accepts connection of the keyed 8-pin
		quick-disconnect plug end from the multi-conductor Handpiece cable.

Makes connection between the Camera Handpiece and Control Module to provide power, video and control for the Acclaim Camera.

8