Pelco AD2088 manual Operation, Front Panel Indicators

Page 33

Operation

FRONT PANEL INDICATORS

Figure 36. EDI5000 Front Panel

Network Activity Indicator

The network activity indicator flashes green when the data interface is sending or receiving network data.

Network Speed Indicator

Network status (connection and speed) is indicated by one of the following conditions:

•Off: the unit is not connected to the network.

•Solid amber: the unit is connected to the network using the 100Base-T standard.

•Solid red: the unit is connected to the network using the 10Base-T standard. NOTE: For optimum performance, the 100Base-T standard is recommended.

Pelco Badge (power indicator)

The Pelco badge glows blue when the unit has power.

COM Port Indicator (COM 1 or COM 2)

The COM port status is indicated by one of the following conditions:

•Off: the unit is not connected to the matrix switcher.

•Solid green: the unit is connected to the matrix switcher or keyboard.

•Blinking amber: the unit is receiving data from the matrix switcher or keyboard.

Reset

The reset button is located at the top of the front panel. Refer to Reset Button on page 34.

C2688M-C (12/08)

33

Page 32 Page 34
Image 33
Page 32 Page 34
Contents Endura EDI5000-AD2088 Data Interface Page Contents List of Tables List of IllustrationsRegulatory Notices Regulatory NoticesRadio and Television Interference Description Accessories and Power SuppliesCompatible Products Sample ApplicationsImportant NOTE. Please Read Sample System Using Endura to Record Matrix VideoFront and Rear Panels COM Port Indicator COM 1 or COM RS-232 ConnectorsHardware Installation Overview InstallationParts List Before YOU BeginDesktop Installation Product Serial Number Label PlacementMounting USER-SUPPLIED PartsEDI5000 Data Interface Desktop Placement Wall Mount InstallationTighten the Thumbscrew to Secure the Unit Rack Mount InstallationTighten Thumbscrew to Secure the Unit Pelco Badge OrientationBasic Hardware Connections Connecting the Matrix System to the EDI5000Com Pin Lead RS-232-Data Rx+ Ground RS-232 Data Tx+Pin Assignment AD2088 Keyboard EDI5000 COM Important Note Please ReadNetwork Connection Power ConnectionPower Supply Options Install Bonjour for WindowsBonjour Technology Use Bonjour to Navigate to the EDI5000 Web Interface Bonjour Logon Renaming EDI5000Software Configuration Software Configuration OverviewOptional Configuration Tasks EDI5000 Login Dialog Box Connect to the System Configuration SoftwareEDI5000 System Configuration Software Configure the Data Interface SettingsChange Configuration Settings Save Changes to the EDI5000 ConfigurationChange Serial Port Settings Change General Configuration SettingsSetting Description Value Click the Network Settings tab Configure Network SettingsConfigure DVR/NVR Settings Edit a DVR/NVR Entry in the EDI5000 Configuration Add a Recorder to the EDI5000 ConfigurationDelete a DVR/NVR Entry From the EDI5000 Configuration Click a device in the NVR Friendly Name sectionConfigure DECODER-MONITOR Settings Add a Decoder Monitor to the EDI5000 ConfigurationAbout the Decoding Device Click the NTP Settings tab Edit a Decoder Monitor Entry in the EDI5000 ConfigurationClick Apply to save the setting Click a device in the Decoder-Monitor Friendly Name sectionFile Support Options Software Update OptionsExporting EDI5000 Configuration Settings Export Configuration SettingsHOW to Sign OUT Additional Software FeaturesImport Configuration Settings Click Sign OutOperation Front Panel IndicatorsReset Button HOW to Operate the EDI5000-AD2088Viewing Video How to Toggle Between Live and Recorded Video Viewing and Controlling VideoPTZ Control Controlling Recorded Video Command Key JoystickFast Forward Speeds Action Current Mode = Play Current Mode = PauseRewind Speeds Using Digital ZoomProblem Meaning Possible Causes Suggested Remedy TroubleshootingSpecifications STANDARDS/ORGANIZATIONS C2688M-C 12/08 Warranty Product Warranty and Return Information
Top Page Image Contents