Pelco AD2088 manual Add a Recorder to the EDI5000 Configuration

Page 27

Add a Recorder to the EDI5000 Configuration

Use the Create New NVR Entry section to add a recording device entry to the EDI5000 configuration.

NOTE: If you are viewing configuration entry information for a recording device that is already in the EDI5000 configuration (as shown in Figure 28), click Add New NVR to view the Create New NVR Entry section.

Figure 27. Adding a DVR/NVR Entry to the EDI5000 Configuration

1.Click the NVR Friendly Name box to see a list of available recording devices in the Endura system (refer to Figure 27).

2.Click a device. The NVR UDN box is updated with the device UDN information.

3.In the Alarm Number box, type the logical number of the matrix system alarm that is to be triggered if the DVR/NVR goes offline.

4.Click Create NVR. Remember that the entry is not saved to the data interface configuration until you restart the application, as described in Configure the Data Interface Settings on page 22.

Edit a DVR/NVR Entry in the EDI5000 Configuration

Figure 28. Editing a DVR/NVR Entry

1.Click a device in the NVR Friendly Name section. The settings in the Editing NVR Info section are updated with the device information.

2.You can modify the following settings:

The friendly name of the recording device

The logical number of the matrix system alarm that is to be triggered if the DVR/NVR goes offline

NOTE: Do not change the entry in the NVR UDN box. Each device in the Endura system is identified by its UDN (unique device number).

3.Click Update NVR. Remember that the configuration changes are not saved to the data interface configuration until you restart the application, as described in Configure the Data Interface Settings on page 22.

Delete a DVR/NVR Entry From the EDI5000 Configuration

1.Click a device in the NVR Friendly Name section.

2.Click Delete NVR, and then click OK in the confirm deletion message. Remember that the device is not removed from the data interface configuration settings until you restart the application, as described in Configure the Data Interface Settings on page 22.

C2688M-C (12/08)

27

Image 27
Contents Endura EDI5000-AD2088 Data Interface Page Contents List of Tables List of IllustrationsRegulatory Notices Regulatory NoticesRadio and Television Interference Sample Applications Accessories and Power SuppliesDescription Compatible ProductsImportant NOTE. Please Read Sample System Using Endura to Record Matrix VideoFront and Rear Panels COM Port Indicator COM 1 or COM RS-232 ConnectorsBefore YOU Begin InstallationHardware Installation Overview Parts ListUSER-SUPPLIED Parts Product Serial Number Label PlacementDesktop Installation MountingEDI5000 Data Interface Desktop Placement Wall Mount InstallationTighten the Thumbscrew to Secure the Unit Rack Mount InstallationTighten Thumbscrew to Secure the Unit Pelco Badge OrientationPin Lead RS-232-Data Rx+ Ground RS-232 Data Tx+ Connecting the Matrix System to the EDI5000Basic Hardware Connections ComPin Assignment AD2088 Keyboard EDI5000 COM Important Note Please ReadNetwork Connection Power ConnectionPower Supply Options Install Bonjour for WindowsBonjour Technology Use Bonjour to Navigate to the EDI5000 Web Interface Bonjour Logon Renaming EDI5000Software Configuration Software Configuration OverviewOptional Configuration Tasks EDI5000 Login Dialog Box Connect to the System Configuration SoftwareEDI5000 System Configuration Software Configure the Data Interface SettingsChange Configuration Settings Save Changes to the EDI5000 ConfigurationChange Serial Port Settings Change General Configuration SettingsSetting Description Value Click the Network Settings tab Configure Network SettingsConfigure DVR/NVR Settings Click a device in the NVR Friendly Name section Add a Recorder to the EDI5000 ConfigurationEdit a DVR/NVR Entry in the EDI5000 Configuration Delete a DVR/NVR Entry From the EDI5000 ConfigurationConfigure DECODER-MONITOR Settings Add a Decoder Monitor to the EDI5000 ConfigurationAbout the Decoding Device Click a device in the Decoder-Monitor Friendly Name section Edit a Decoder Monitor Entry in the EDI5000 ConfigurationClick the NTP Settings tab Click Apply to save the settingFile Support Options Software Update OptionsExporting EDI5000 Configuration Settings Export Configuration SettingsClick Sign Out Additional Software FeaturesHOW to Sign OUT Import Configuration SettingsOperation Front Panel IndicatorsReset Button HOW to Operate the EDI5000-AD2088Viewing Video How to Toggle Between Live and Recorded Video Viewing and Controlling VideoPTZ Control Controlling Recorded Video Command Key JoystickFast Forward Speeds Action Current Mode = Play Current Mode = PauseRewind Speeds Using Digital ZoomProblem Meaning Possible Causes Suggested Remedy TroubleshootingSpecifications STANDARDS/ORGANIZATIONS C2688M-C 12/08 Warranty Product Warranty and Return Information