File Transfers
File Transfers
Transferring Switch Configurations
Using XGet and XPut To Transfer a Configuration Between the Switch and a PC or Unix Workstation
The PC or workstation must be operating as a VT100 or ANSI terminal and connected directly to the switch’s console port. Also, the PC or workstation must be running an
N o t e | XGet overwrites the switch’s current configuration with the downloaded |
| configuration. The switch then automatically reboots itself. |
|
|
To use XGet or XPut, you need the name assigned to the configuration file on the PC or workstation.
1.On the PC or workstation, start the
2.From the switch’s Main Menu select:
5.Diagnostics...4.Command Prompt3.At the command prompt, execute one of the following commands:
To upload a configuration to a file on a PC or Unix workstation:
xput config remote_file [pc/unix]To download a configuration from a file on a PC or Unix workstation:
xget config remote_file [pc/unix]where: remote_file is the name of the file in which the configuration is to be stored (put), or is stored (get)
[pc/unix] is one of the following optional values:
∙unix (the default) specifies the Unix file format.
∙pc specifies the PC file format.
If the PC or workstation does not respond to an XPut or XGet command, the command times out and control returns to the Command Prompt line.