Configuring the Switch
SNMP Communities
If you are adding a community, the Community Name field is blank.
If you are editing an existing community, the values for the currently selected Community appear in the fields.
Type the value for this field
Use the Space bar to select values for other fields
Switch the Configuring
FigureN o t e : | In the default configuration, no manager addresses are configured. In this |
| case, all management stations using the correct community name may access |
| the switch with the View and Access levels configured for that community. If |
| you want to limit access to the switch, you can enter up to ten IP addresses |
| of authorized management stations into the Manager Address field. Entering |
| the IP addresses in the Manager Address field limits access to only those |
| addresses. |
| 4. Enter the appropriate value in each of the above fields (use the [Tab] key |
| |
| to move from one field to the next). |
| 5. Press [Enter], then [S] (for Save) and return to the Switch Management |
| Access Configuration menu. |