Configuring the Switch
IP Multicast (IGMP) Service
Use this procedure to configure or edit the IGMP settings for the switch.
1.From the Main Menu, select:
3.Switch Configuration5.Advanced Features1.IP Multicast (IGMP) ServiceSwitch the Configuring
Figure2.Press [E] (for Edit) to highlight the IGMP Enabled parameter
3.Press the Space bar to select Yes (to enable IGMP).
4.Use [v] to highlight the Forward with High Priority parameter.
5.If you want IGMP traffic to be forwarded with a higher priority than other traffic on the switch, use the Space bar to select Yes. Otherwise, leave this parameter set to No.
6.Use [v] to highlight the IP Mcast parameter setting for a port you want to reconfigure. (The options are: Auto, Blocked, and Forward. Refer to the online Help for further information on these choices.)
7.Repeat step 6 for each port you want to configure.