Using the Switch Console
Screen Structure and Navigation
TableTask:Actions:
Execute an action from the “Actions
Use either of the following methods:
•Use the arrow keys ( [<] ,or [>] ) to highlight the action you want to execute, then press [Enter].
•Press the key corresponding to the capital letter in the action name. For example, in a configuration menu, press [E] to select Edit and begin editing parameter values.
Reconfigure (edit) a | 1. Select a Configuration menu item, such as System Information. | |
parameter setting or a |
| (See figure |
field: | 2. | Press [E] (for Edit on the Actions line). |
| 3. | Use [Tab] or the arrow keys ([<], [>], [^], or [v]) to highlight the |
|
| item or field. |
| 4. | Do one of the following: |
|
| – If the parameter has preconfigured values, use the Space bar |
|
| to select a new option (the help line instructs you to “Select” |
|
| a value). |
|
| – If there are no preconfigured values, type in a value (the help |
|
| line instructs you to “Enter” a value). |
| 5. | If you want to change another parameter value, return to step 3. |
| 6. | If you are finished editing parameters in the displayed screen, |
|
| press [Enter] to return to the Actions line, and do one of the |
|
| following: |
|
| – To save any configuration changes you have made, press [S] |
|
| (for the Save action). |
|
| – To exit from the screen without saving any changes that you |
|
| have made (or if you have made no changes), press [C] (for |
|
| the Cancel action). |
|
| Note: Most parameter changes are activated when you execute |
|
| Save, and it is therefore not necessary to reboot the switch after |
|
| making these changes. But if an asterisk appears next to any |
|
| menu item you reconfigure, it is necessary to reboot the switch |
|
| to implement the change. In this case, rebooting should be done |
|
| after you have made all desired changes and then returned to |
|
| the Main Menu. |
| 7. | When you are finished editing parameters, return to the Main |
|
| Menu. |
| 8. | If necessary, reboot the switch by selecting Reboot Switch from |
|
| the Main Menu. (Refer to the Note, above.) |
|
| |
Exit from a | Press [B] (for the Back action). | |
screen. |
|
|
|
|
|
Console Switch the Using