Pelco AD2088 manual Rewind Speeds, Using Digital Zoom

Page 38

Rewind Speeds

When you press Near (Rewind) or move the joystick left, the recorded video plays in reverse at 2x speed. Pressing Near again increases the speed at which the video plays in reverse. Figure E identifies the rewind progression (refer to Playback Speed on page 37 for an explanation of the abbreviations; negative values, such as -8x, indicate reverse playback.).

Table E. Rewind Speeds

Action

Current Mode = Play

Current Mode = Pause

 

 

 

Press Near (Rewind) or move the

Video plays in reverse at 1X

Video steps back one frame

joystick left

 

 

 

 

 

Press Near again

Video plays in reverse at 2X

 

 

 

 

Press Near again

Video plays in reverse at 4X

 

 

 

 

Press Near again

Video plays in reverse at 8X

 

 

 

 

Press Near again

Video plays in reverse at 16X

 

 

 

 

Press Near again

Video plays in reverse at 32X

 

 

 

 

Press Near again

Video plays in reverse at 64X

 

 

 

 

Press Far (Fast Forward) or move the

Video speed decreases one level; if video is playing at -8X,

 

joystick right

this decreases the speed to -4X. When viewing recorded video

 

 

at the lowest speed (-¼X), decreasing the speed further has

 

 

no effect; press Play to return to normal speed

 

 

 

 

Using Digital Zoom

NOTE: This functionality applies to recorded video only.

During playback of recorded video, you can use the digital zoom feature to enlarge a portion of the video image. When digital zoom is enabled, a picture-in-picture frame opens on the monitor. The picture-in-picture frame displays the original recorded image and contains a square showing the portion of the image that is enlarged. The remaining monitor image displays the enlarged image.

UP

DIGITAL ZOOM OUT

DIGITAL ZOOM IN

LEFT

RIGHT

DOWN

Figure 40. Using Digital Zoom

1.Twist the joystick to the right and then return the joystick to the center position. Repeat this step to zoom in further.

2.To zoom out to a lower digital zoom magnification, twist the joystick to the left and then return the joystick to the center position. When you reach normal magnification, the picture-in-picture frame on the monitor disappears.

When digital zoom is active, move the joystick in any direction (up, down, left, or right) to move the square inside the picture-in-picture frame; this allows you to move the portion of the image covered in the zoomed view.

NOTE: When digital zoom is active, each joystick movement must be followed by a return to the center position.

38

C2688M-C (12/08)

Image 38
Contents Endura EDI5000-AD2088 Data Interface Page Contents List of Illustrations List of TablesRadio and Television Interference Regulatory NoticesRegulatory Notices Compatible Products Accessories and Power SuppliesDescription Sample ApplicationsSample System Using Endura to Record Matrix Video Important NOTE. Please ReadCOM Port Indicator COM 1 or COM RS-232 Connectors Front and Rear PanelsParts List InstallationHardware Installation Overview Before YOU BeginMounting Product Serial Number Label PlacementDesktop Installation USER-SUPPLIED PartsWall Mount Installation EDI5000 Data Interface Desktop PlacementRack Mount Installation Tighten the Thumbscrew to Secure the UnitPelco Badge Orientation Tighten Thumbscrew to Secure the UnitCom Connecting the Matrix System to the EDI5000Basic Hardware Connections Pin Lead RS-232-Data Rx+ Ground RS-232 Data Tx+Important Note Please Read Pin Assignment AD2088 Keyboard EDI5000 COMPower Connection Network ConnectionBonjour Technology Power Supply OptionsInstall Bonjour for Windows Use Bonjour to Navigate to the EDI5000 Web Interface Renaming EDI5000 Bonjour LogonOptional Configuration Tasks Software ConfigurationSoftware Configuration Overview Connect to the System Configuration Software EDI5000 Login Dialog BoxConfigure the Data Interface Settings EDI5000 System Configuration SoftwareSave Changes to the EDI5000 Configuration Change Configuration SettingsSetting Description Value Change Serial Port SettingsChange General Configuration Settings Configure Network Settings Click the Network Settings tabConfigure DVR/NVR Settings Delete a DVR/NVR Entry From the EDI5000 Configuration Add a Recorder to the EDI5000 ConfigurationEdit a DVR/NVR Entry in the EDI5000 Configuration Click a device in the NVR Friendly Name sectionAbout the Decoding Device Configure DECODER-MONITOR SettingsAdd a Decoder Monitor to the EDI5000 Configuration Click Apply to save the setting Edit a Decoder Monitor Entry in the EDI5000 ConfigurationClick the NTP Settings tab Click a device in the Decoder-Monitor Friendly Name sectionSoftware Update Options File Support OptionsExport Configuration Settings Exporting EDI5000 Configuration SettingsImport Configuration Settings Additional Software FeaturesHOW to Sign OUT Click Sign OutFront Panel Indicators OperationViewing Video Reset ButtonHOW to Operate the EDI5000-AD2088 PTZ Control How to Toggle Between Live and Recorded VideoViewing and Controlling Video Command Key Joystick Controlling Recorded VideoAction Current Mode = Play Current Mode = Pause Fast Forward SpeedsUsing Digital Zoom Rewind SpeedsTroubleshooting Problem Meaning Possible Causes Suggested RemedySpecifications STANDARDS/ORGANIZATIONS C2688M-C 12/08 Product Warranty and Return Information Warranty