Samson GT100C manual Guided Tour Front Panel

Page 8

Guided Tour - Front Panel

ENGLISH

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 



 







  

















 

1.INPUT - Connect your guitar to this standard 1/4” unbalanced jack. This GT Series Input was designed to handle the signals from guitar with a wide range of output levels from lipstick singe coils to the beefiest humbucker.

2.CRUNCH LED – When this light is illuminated, CRUNCH is on.

3.CRUNCH – CHANNEL 1’s pre-amp level control used to dial up tube overdrive tone for just a touch of harmonic warmth for blues all the way to a dirty rhythm of classic and modern rock. The CRUNCH control can be switched on and off using the included footswitch.

4.VOLUME - (CH1) This is the overall volume control for CHANNEL1.

5.BASS - This control provides approximately 15 db of cut or boost at 100 Hz, with a peak (bell) curve. When the knob is at the 12 o’clock ("5") position, there is no boost or attenu- ation (that is, flat response). As it is turned clockwise from the "5" position, the frequency area is boosted; as it is turned counterclockwise from the "5" position, the frequency area is attenuated.

6.TREBLE - This peaking control provides approximately 15 db of cut or boost at 5 kHz. When the knob is at the 12 o’clock ("5") position, there is no boost or attenuation (that is, flat response). As it is turned clockwise from the "5" position, the frequency area is boosted; as it is turned counterclockwise from the "5" position, the frequency area is attenuated.

7.CH1 LED – When this light is illuminated, CHANNEL 1 is selected.

8.CHANNEL SWITCH - This switch allows you to select either CHANNEL 1 or CHANNEL 2.

9.CH2 LED - When this light is illuminated, CHANNEL 2 is selected.

10.GAIN - CHANNEL 2’s pre-amp level control used to dial up tube overdrive tone for classic metal distortion, shredding leads and fat modern chunk.

11.VOLUME (CH2) - This is the overall volume control for CHANNEL 2.

Image 8
Contents GT100C Combo Important Safety Instructions Consignes de sécurité importantes Instrucciones importantes de seguridad Table of Contents Introduction Hartke GT100 Guitar Amplifier Features Guided Tour Front Panel Guided Tour Front Panel Guided Tour Rear Panel Setting Up and Using Your Hartke GT100 Guitar Amplifier Setting Up and Using Your Hartke GT100 Guitar Amplifier Select ChannelUsing the Footswitch Jack and Effects Loop Français Hartke GT100 Caractéristiques Présentation de la face avant Présentation de la face avant Présentation de la face arrière #  #  #!..%,.374# #  Utilisation de la pédale et de la boucle d’effets Einleitung Hartke GT100 Gitarren-Amp Features Geführter Rundgang Vorderseite Geführter Rundgang Vorderseite Geführter Rundgang Rückseite Hartke GT100 Gitarren-Amp einrichten und einsetzen Schalter, um Channel 2 zu wählen Footswitch-Buchse und Effekt-Loop verwenden Introducción Características de los Hartke GT100 Recorrido guiado Panel frontal Recorrido guiado Panel frontal Recorrido guiado Panel trasero #  #  #!..%,.374# #  Uso de la toma Footswitch y del bucle de efectos Introduzione Hartke GT100 Caratteristiche Tour Guidato Pannello Frontale Tour Guidato Pannello Frontale Tour Guidato Pannello Posteriore Avvertenza L’amplificatore GT100 è Senso anti-orario Utilizzare la connessione Footswitch e l’Effects Loop Sample Settings / Exemples de réglages / Einstellungsmuster Sample SettingsEjemplos de configuraciones / Esempi d’impostazioni Ejemplos de configuracionesGT100 Sample Settings CH-2 80s MetalSetting Templates Specifications Rear Panel ConnectorsCaractéristiques techniques Connecteurs en face arrièreTechnische Daten Rückseitige AnschlüsseEspecificaciones técnicas Conectores del panel traseroSpecifiche Connettori Pannello Posteriore

GT100, GT100C specifications

The Samson GT100C and GT100 are cutting-edge technologies that stand at the forefront of audio processing solutions, delivering unmatched performance for various audio applications. These models are specifically engineered for musicians, sound engineers, and audio enthusiasts who demand high-quality sound coupled with user-friendly features.

One of the standout features of the Samson GT100C and GT100 is their robust power output capabilities. Both models are equipped with a high-efficiency amp, which allows for a clear and dynamic audio experience. This power output is especially beneficial in live settings, ensuring that sound projection is not only loud but also maintains clarity, irrespective of the volume level.

In terms of connectivity, the GT100C and GT100 models are loaded with options for versatility. They feature multiple input channels that accommodate various instruments and microphones, allowing users to seamlessly switch between different audio sources. This is particularly advantageous for live performances as well as studio recordings where multiple inputs are essential.

The incorporation of advanced digital signal processing (DSP) technology is another highlight of the Samson GT100C and GT100 models. This technology enables a wide range of effects, including reverb, delay, and modulation, thereby providing users with the tools to enhance their sound creatively. Control over these effects is made easy with an intuitive interface, allowing quick adjustments during performances.

Moreover, the ergonomic design of both models ensures they are easy to transport and set up, making them ideal for on-the-go musicians. The lightweight yet sturdy construction provides durability, reducing the concerns associated with frequent travel.

In addition to their practical features, the Samson GT100C and GT100 also prioritize quality materials, resulting in reliable performance and longevity. Users can expect these models to withstand the rigors of professional use while consistently delivering exceptional sound quality.

In summary, the Samson GT100C and GT100 represent a sophisticated choice for anyone looking to enhance their audio experience. With their powerful output, versatile connectivity options, advanced DSP capabilities, and durable design, they cater to a wide range of performance scenarios, making them essential tools for modern audio professionals. Whether you're playing in a band, recording in a studio, or performing solo, these models offer everything needed for outstanding sound production.