Pentax Optio S manual Using the AC Adapter optional, Getting

e02_kb341_001_027_41e.qk 03.2.14 4:04 PM Page 14

●Approximate Operating Time (when the D-LI8 battery is fully charged)

Number of recordable images : Approx. 160 (when 50% shooting

			uses flash, LCD monitor ON)
	Playback time		: Approx. 110 min.
Getting	*	The description above is based on Pentax measuring conditions and
		may vary depending on capture mode and shooting conditions.
	Caution	• Generally, battery performance is temporarily deteriorate
Started		some protection against cold or inside the clothes. Battery
		as temperature decreases. When the camera is used in a

cold environment, keep this product warm by holding it in

performance once deteriorated due to low temperature will be recovered when the batteries are returned to room tem- perature.

•Be sure to take a spare battery with you when travelling abroad or to a cold region or if you intend to take a lot of pictures.

●Battery Level Indicator

You can check the battery level by the symbol displayed on the LCD monitor.

	(lit green)	: Adequate power remains.
↓
	(lit green)	: Battery is running low.
↓
	(lit yellow)	: Battery is running very low.
↓
	(lit red)	: Battery is exhausted.
↓

[Battery depleted.] : After the message is displayed, the camera will turn off.

	To power outlet z
v	x
	AC plug
	cord

c

AC adapter

Using the AC Adapter (optional)

If you intend to use the LCD monitor for a long time or connect the camera to a PC, use of the AC adapter D-AC8 (optional) is recom- mended.

zMake sure that the camera is turned off and open the terminal cover.

xConnect the DC terminal on the AC adapter to the DC input terminal on the camera, being sure to match the symbols.

cConnect the AC plug cord to the AC adapter.

vPlug the AC plug cord into the power outlet.

Caution • Make sure that the camera is turned off when connecting or disconnecting the AC adapter.

•Make sure that the AC plug cord and connecting cord are inserted securely. If the cord becomes disconnected while you are taking pictures, the data may be lost.

•When using the AC adapter D-AC8, be sure to read the operation manual accompanying the AC adapter.

•When connecting the DC terminals, be sure to match the

symbols. Inserting the plugs with too much force may damage them.

Getting Started

14 15