Pelco C2601M-C (3/07) manual C2601M-C 3/07

Page 27

Figure 27. Running a Command

9.Type the ping command followed by the IP address that you entered in step 6, and then press the Enter key on your keyboard. The command would resemble the following:

ping 192.168.50.2

If the IP address is correct, a DOS window appears with a series of messages.

Figure 28. Verifying an IP Address

If the IP address is not correct, the DOS windows appears with a series of time out messages. Check the IP address again, or contact a network administrator to determine the correct address.

10. Close the DOS window by clicking the X in the upper-right corner.

C2601M-C (3/07)

27

Image 27
Contents DX4000 Digital Video Recorder Page Contents List of Illustrations Radio and Television Interference Regulatory NoticesDescription Features ModelsAbout this Manual Before You Begin Package ContentsFront Panel Layout Video Control Buttons on the Front Panel of the DX4000 Remote Control Layout Rear Panel of the DX4000 Connecting Devices to the DX4000Cable Type Maximum Distance DX4000 Overview of the SystemStarting and Stopping the DX4000 OperationDate and Time Configuring the SystemChanging Network Settings Network SettingsNetwork Menu Entering AN IP Address Configuring Video RecordingUpgrading or Changing Firmware on the DX4000 Locating the IP AddressUpgrading Through a Network Connection Upgrade In Progress Message C2601M-C 3/07 Upgrading Through a Direct Connection Firmware Upgrade MessageC2601M-C 3/07 Verifying Network Connections Internet Protocol TCP/IP Properties Screen C2601M-C 3/07 Installing and Updating the Remote Agent Application To install or update the Remote Agent C2601M-C 3/07 C2601M-C 3/07 To install the Web client with a direct Internet connection Installing the Web ClientTo install the Web client from the resource CD C2601M-C 3/07 C2601M-C 3/07 ELECTRICAL/VIDEO SpecificationsCertifications C2601M-C 3/07 Product Warranty and Return Information ISO9001