Technicolor - Thomson 5400LDK manual Script board, Top Light

Script board Top Light

3	1
	4
	2

To mount the optional Script board (LDK 6985/21) onto the camera proceed as follows:

a.Secure the Script board to the top-rear of the camera with the quick mount adapter 1 .

b.Connect Script board light cable to the script light connector 2 at the rear of the camera.

Caution

Ensure that the script light does not use more than 3W of power.

The script light is switched on and off, and the intensity is varied with the knob 3 at the rear of the Script board. The retaining rings and clip 4 can be screwed onto the right or left side if required.

1

2

1

2

To mount a top light 1 onto the camera, proceed as follows:

a.Screw the top light 1 into either the WW1/4”-20 screw hole 2 located on the carrying handle or the screw hole 2 on the top of the microphone holder.

b.Power the top light according to the instructions delivered with the light.

2-12 Operator's Manual LDK 5400 - Triax Adapter for LDK 100 Series Assembling the Units